Announcement

Collapse
No announcement yet.

The believed abstraction of a 12 foot clinker dinghy.

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • The believed abstraction of a 12 foot clinker dinghy.

    Hello fellow WoodenBoat enthusiasts,

    This is my first contribution to the forum,so here goes.

    I was given a 12 foot clinker dinghy.The original intention of the previous owner however was to sell it, (when he got around to it), as he had no time to work on it .We had talked about this dinghy over the previous weeks as he new of my interest in wooden boats having partially restored a 1902 Bailey yacht.With curiosity piqued I went and had a look. The dinghy itself had been left outside in the elements uncovered for a number of years and upon closer inspection revealed a number of rotten areas especially around the transom.The extent of the deterioration came as somewhat of a surprise and somewhat of a disappointment to the owner that he had let it get that way,so much so that he said that I could have it, if I could save it.

    The shape and volume of the dinghy was what caught my eye,"it's got potential" the voice inside my head was telling me (how many of you have heard that same voice to the detriment of bank balances,relationships etc etc) but it was free. I told the owner, that upon further inspection if it was going to be more than I needed, then I would gift it on.

    I haven't,it's well ensconced in the workshop.Let the fun begin. So here are a couple of pics as found.I will regale you with the resurrection of this dinghy over the coming weeks,months, probably years.
    Attached Files
    Last edited by Mike1902; 08-14-2020, 03:49 AM.
    Focus on the effort not the outcome.

    Whatever floats your boat.

  • #2
    Re: The believed abstraction of a 12 foot clinker dinghy.

    Well I like her lines, and I reckon she would have carried a deal of canvas and been quite quick. Bit small for a working boat, she's the same length as my ply racing dinghy but wider and heavier of course.
    Is the centreplate still in her? Is the pulpit on top of the original mast fitting? I note the pin rail and expect she would have been a gaffer. Have you found any ID plate or stamped hull number?
    I do hope someone can come up with her original class.

    Comment


    • #3
      Re: The believed abstraction of a 12 foot clinker dinghy.

      Originally posted by skuthorp
      Well I like her lines, and I reckon she would have carried a deal of canvas and been quite quick. Bit small for a working boat, she's the same length as my ply racing dinghy but wider and heavier of course.
      Is the centreplate still in her? Is the pulpit on top of the original mast fitting? I note the pin rail and expect she would have been a gaffer. Have you found any ID plate or stamped hull number?
      I do hope someone can come up with her original class.
      Welcome to the Forum.
      Deffo not a working boat. That is batten seam clinker ply. Probably glued ply.
      Clean her out thoroughly and search for any failing paint. That will help you to determine the condition of the planking.
      It really is quite difficult to build an ugly wooden boat.

      The power of the web: Anyone can post anything on the web
      The weakness of the web: Anyone can post anything on the web.

      Comment


      • #4
        Re: The believed abstraction of a 12 foot clinker dinghy.

        Frostbite?
        The Frostbite story began in the frigid waters of Long Island Sound in January 1932 when the first Frostbite regatta was sailed in rain, hail and snow, and was reported in the New York Herald Tribune.


        Pete
        The Ignore feature, lowering blood pressure since 1862. Ahhhhhhh.

        Comment


        • #5
          Re: The believed abstraction of a 12 foot clinker dinghy.

          Looks pretty good from here...


          http://stickupsharpie.wordpress.com/

          http://gunningdory.wordpress.com/

          Comment


          • #6
            Re: The believed abstraction of a 12 foot clinker dinghy.

            Originally posted by epoxyboy
            Frostbite?
            The Frostbite story began in the frigid waters of Long Island Sound in January 1932 when the first Frostbite regatta was sailed in rain, hail and snow, and was reported in the New York Herald Tribune.


            Pete
            Nah. If the Frostbite is a One Design the transom is the wrong shape.
            It really is quite difficult to build an ugly wooden boat.

            The power of the web: Anyone can post anything on the web
            The weakness of the web: Anyone can post anything on the web.

            Comment


            • #7
              Re: The believed abstraction of a 12 foot clinker dinghy.

              Originally posted by skuthorp
              Well I like her lines, and I reckon she would have carried a deal of canvas and been quite quick. Bit small for a working boat, she's the same length as my ply racing dinghy but wider and heavier of course.
              Is the centreplate still in her? Is the pulpit on top of the original mast fitting? I note the pin rail and expect she would have been a gaffer. Have you found any ID plate or stamped hull number?
              I do hope someone can come up with her original class.
              Her original design is a mystery.All the previous owner could tell me was that a small number of these boats were built in the seventies in Tauranga New Zealand by the designer.There is no ID plate or hull number.

              The dinghy is 12 feet in length with a beam of 6 feet.The rig is gaff main and jib.The centreplate is made from 1/4 inch steel.
              Focus on the effort not the outcome.

              Whatever floats your boat.

              Comment


              • #8
                Re: The believed abstraction of a 12 foot clinker dinghy.

                Originally posted by Peerie Maa
                Welcome to the Forum.
                Deffo not a working boat. That is batten seam clinker ply. Probably glued ply.
                Clean her out thoroughly and search for any failing paint. That will help you to determine the condition of the planking.
                Thank you for the welcome.

                You are indeed correct about the batten seam clinker ply construction.The seams were glued with resorcinol with 1/2 inch screws every 4 inches.

                To bring everyone up to speed,I acquired the dinghy just before Christmas last year.It spent a little time hanging off the workshop ceiling before the Covid lockdown came into force here in NZ.Then with not much else to do during that time I retreated to the workshop and proceeded to strip the boat right back.

                I intend to place a daily post on this forum to show the progress I have made so far until I am up to date.

                Cheers.
                Focus on the effort not the outcome.

                Whatever floats your boat.

                Comment


                • #9
                  Re: The believed abstraction of a 12 foot clinker dinghy.

                  Originally posted by timo4352
                  Looks pretty good from here...
                  It's a great little boat.The photos don't give her justice.She is quite voluminous though low freeboarded amidships.I intend to use her for camp cruising and participating in the odd race at the wooden boat regattas.
                  Focus on the effort not the outcome.

                  Whatever floats your boat.

                  Comment


                  • #10
                    Re: The believed abstraction of a 12 foot clinker dinghy.

                    Originally posted by Peerie Maa
                    Nah. If the Frostbite is a One Design the transom is the wrong shape.
                    She definitely has a new transom now.I will post updates over the next week showing how this was done.
                    Focus on the effort not the outcome.

                    Whatever floats your boat.

                    Comment


                    • #11
                      Re: The believed abstraction of a 12 foot clinker dinghy.

                      Great little boat - looking forward to watching and learning.
                      ​When Your Draft Exceeds Your Depth, You Are Most Assuredy Aground....
                      ~ First Immutable Law of The Sea

                      Comment


                      • #12
                        Re: The believed abstraction of a 12 foot clinker dinghy.

                        Welcome aboard!
                        That's a big little boat.

                        Comment


                        • #13
                          Re: The believed abstraction of a 12 foot clinker dinghy.

                          looks good from here...

                          Comment


                          • #14
                            Re: The believed abstraction of a 12 foot clinker dinghy.

                            There are some nice touches on that hull. Looking forward to seeing her rigged up.

                            Is there a thwart missing? Where does one sit to use those oarlocks?
                            Steve

                            If you would have a good boat, be a good guy when you build her - honest, careful, patient, strong.
                            H.A. Calahan

                            Comment


                            • #15
                              Re: The believed abstraction of a 12 foot clinker dinghy.

                              Originally posted by stromborg
                              There are some nice touches on that hull. Looking forward to seeing her rigged up.

                              Is there a thwart missing? Where does one sit to use those oarlocks?
                              There is no indication that a thwart was fitted and I'm picking that one must have sat on the platebox to use the oars.

                              I intend to build new centreboard and housing which will incorporate a seating arrangement for rowing.
                              The oars that came with the boat look a little short for the beam,would have been an interesting sight watching someone row it.Extending the oars will be another exercise that I look forward to.
                              Focus on the effort not the outcome.

                              Whatever floats your boat.

                              Comment

                              Working...
                              X
                              😀
                              🥰
                              🤢
                              😎
                              😡
                              👍
                              👎