So I Started to sand and pull some old calking. The strake below the water line has some different calking than the calking above the waterline. It is elastic rubbery calking and looks awful tar like stains.
So I pulled it all out and and scraped all the gunk off clean and clear. A little scary cause I can see inside the boat
The calking above the water line is totally different and tight and clean. Do I have to pull that out as well and re-caulk?
OK the next question and I will search WBF Building FAQ but how exactly does one caulk a boat like this and I'm supposed to soak the wood first ? What tools do I need to buy and where do I get calking and what do I use to traditionally caulk. I am a TOTAL novice at this.