Results 1 to 3 of 3

Thread: Bending G10

  1. #1
    Join Date
    Jan 2008
    Location
    Winnipeg, MB
    Posts
    32

    Default Bending G10

    G10 appears to be a very stiff material. If were to be cut in long strips can slight curves/bends be introduced to it by applying a heat gun, then clamping it in position while it cools?

  2. #2
    Join Date
    Oct 2000
    Location
    Padanaram, MA USA
    Posts
    9,730

    Default Re: Bending G10

    No. G-10 is made from glass and epoxy. Epoxy is not thermoplastic.

  3. #3
    Join Date
    Jun 2002
    Location
    Lewiston, Maine
    Posts
    971

    Default Re: Bending G10

    But it sure does break down nicely when exposed to heat....

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •