Hello I'm in the process of restoring a Chesapeake Deadrise Charter Boat. I have a question regarding the underwater application of cpes. I am currently sanding the bottom of my boat and it was originaly coated with epoxy under all the coats of antifoulant. There are a few areas where the epoxy is rubbed off and delaminated. I decided not to take the entire bottom to wood because for the most part the epoxy coat is doing it's job. My question is, after I sand the bare areas and the delaminated areas to clean the wood and apply CPES should I put a coat of epoxy resin afterwards? Thank You for all your answers! I have many great ideas thanks to wooden boat forum.
38ft deadrise 14.3 beam