Anyone have a source for neoprene or decent rubber gasket stock measuring 5/16" square (or, 8mm x 8mm) for portholes? I have 8 elliptical ports which need new gaskets, each one using 34" of the stuff.
TIA,
Craig Johnsen
schooner MAGIC
Senior Member
porthole gasket stock source needed
Anyone have a source for neoprene or decent rubber gasket stock measuring 5/16" square (or, 8mm x 8mm) for portholes? I have 8 elliptical ports which need new gaskets, each one using 34" of the stuff.
TIA,
Craig Johnsen
schooner MAGIC
Senior Senior Member
Email: sales@allstategasket.com
Tel: (631) 254-4050 • Fax: (631) 254-4330
Allstate Gasket, Inc • 31 Prospect Place • Deer Park, New York 11729-3713 USA
Wakan Tanka Kici Un
..a bad day sailing is a heckuva lot better than the best day at work.....
Fighting Illegal immigration since 1492....
Live your life so that whenever you lose, you're ahead."
"If you live life right, death is a joke as far as fear is concerned."
Senior Member
porthole gasket source
Gracias, senor Paladin!
Craig
Itchen
Gasket source
I have used McMaster Carr. Look for square 0 ring stock. I am always looking for weird stuff...they usually have it and will get it to you within a day or two. Excellent company.
Good luck,
Mark
ps: Saw your boat years back while chartering out of Anacortes.
What a beaut. Did I read somewhere that it is your design?
Senior Member
MAGIC's ports
Hi, Mark:
Yes, MAGIC is my design, thanks for the compliment. She is probably wiggling her transom and blushing!MAGIC turns 14 years old on May 2nd.
As if happens, M-C does not show that size, but I appreciate the suggestion as well.
Craig Johnsen
Go west
Gardico in seattle
Any kind of gasket Gardico
Jake
Posting Permissions
Reply With Quote