A Minahouet in NC

[plcrawfo]

Hello - My name is Philip and I'm building a F. Vivier Minahouet. After some encouragement from other forum members, I thought I'd post a few pictures of my build progress.

It started last year with translating the plans, as they're only offered in French. Lots of time spent with Google translate. I took delivery of the kit last summer.
Kit Delivery.jpg

I got started last summer by working on the spars. I resawed doug fir 4x4's to get quartersawn staves to make a birdsmouth mast. Sawing the 8 footers was easy, but the 12 footers - I thought I was going to have to cut a hole in the wall....

Mast Const - Resawing.jpg

Resaw 2.jpg

[plcrawfo]

After scarphing the staves, I used a BM bit in the router table, and the mast was on its way...

Birdsmouth Glueup.jpg

After gluing in the foot and head, I got to rounding. A power planer made quick work getting close, then handplanes and sandpaper to finish up.

Mast Round Up.jpg

[plcrawfo]

I made up the boom and yard, and sanded all to 180 grit and put away for paint and varnish later. I'll make the bowsprit later as well.
spars.jpg

Next I steam bent laminations of doug fir around the inner stem to make glue up of the outer stem easier.

steam box.jpg
stem glueup.jpg

[plcrawfo]

Next came work on the centerboard case, which is glued in with the building jig. After laminating the sides and gluing the cabins on the outsides, I glassed the inside and added some dynel where the pin rides for extra protection.

centerboard dynel (2).jpg

The plans call for floatation foam in a semi-closed compartment in the bow. On the plans, the compartment drains with limber holes, but I'm concerned about the foam eventually becoming waterlogged or inducing rot. So my plan for now is to make up one or two custom buoyancy that can be pushed through access hatches and inflated and then removed. I made hatches in the foremost bulkhead.

fore hatches.jpg

I then beveled the stem and epoxy coated frames and bulkheads before installing on the building jig.

stem bevel.jpg

[plcrawfo]

I've been working on setting up the building jig over the past couple of weeks. It started with the construction of the ladder frame. I plunked down the cash for a couple of LVL beams and I'm glad I did. They were nice, straight, and stiff....no wrestling with warped construction lumber.

Ladder Frame.jpg

After the ladder frame was on it's feet, I spent several evenings making sure things were square and level. I think installed the building molds, frames, and bulkheads. Today I glued the centerboard case in place, along with the inner stem.

Building Jig Port.jpg
Building Jig Port Bow.jpg

[pez_leon]

Welcome to the forum, and thanks for posting these pictures. I am very jealous of your shop! I'm looking forward to seeing the boat come together.

The plans call for floatation foam in a semi-closed compartment in the bow. On the plans, the compartment drains with limber holes, but I'm concerned about the foam eventually becoming waterlogged or inducing rot. So my plan for now is to make up one or two custom buoyancy that can be pushed through access hatches and inflated and then removed.

I'm currently building a Vivier Seil and share some of your anxiety about foam filled compartments. However:
1) Plenty of people have built this way and report no problems, and
2) I think that an inflated bag might allow less ventilation and trap more moisture.

Have you considered creating airtight buoyancy compartments? Plugging the limber holes with epoxy is dead easy. Your hatches look so clean that, were you to rabbit in some surgical tubing and build a way to dog them down tightly, I would guess you'd have something that was at least very close to sealed.

Keep us posted!

- James

[Stora Le]

This is great!
I think the Minahouet has been neglected and deserves more attention. I am going to be very interested in your build.
I am also very impressed by your building shop, especially how well organized and clean it is.
Can't wait for further instalments.
Viktor

[plcrawfo]

Hi James,

Thanks for the kind words. I spent a year turning my garage into a real workshop, primarily so I would be comfortable building a boat (HVAC really helps make things comfortable).

I've considered making the fore compartment air tight. I went ahead and put in grooves for surgical tubing if I decide to go that route. I plan to deflate and remove the buoyancy bags when not in use, but I'm not sure how easy that will be (I'll test it out when I flip the hull). If I decide that removing the bags will be more difficult, I'll probably seal the limber holes and go water-tight.

20230326_183259.jpg

[stromborg]

Nice. I've only seen Minahouet in pictures or video but always liked to the look, thanks for joining the fray here.

[CaptChap]

Members with shops that clean and well-organized should NOT be allowed to post pics of them...it's too depressing to untidy slobs like me!
Congrats on the new building start and especially on having such a great shop to work in! Cheers!

[MattGER]

Wow! Not at all envious of your workshop!

All the best for the project

[schoonerjay]

Hello there Philip! I suspect we share the same last name... although I doubt we're kin, as I don't have any in Pittsboro! (I'm up in the mountains). You do have a nice shop space, with a great design to work with, and you're doing fast work at that!