Oars

[Rigadog]

Does anyone know where to get a pair of good wooden oars (aside from Shaw&Tenny)? The (Barkley Sound?) company in Canada I think has closed doors.

[johngsandusky]

Check Craigslist and other local ads, watch for tag and estate sales. Cutting a pair from spruce planks isn't too hard.

[wizbang 13]

storebought oars ?
like...from a store?
nex thing ya know, people are gonna start BUYING sails !

[WI-Tom]

Van Fancy is still in business, I think.

http://www.towerwebsites.com/fancyoars-paddles

Tom

[Edward Pearson]

Plastimo make / sell wooden oars. On the good side they distribute 10 different lengths and go upto 11 ft'ers. I assume you wanted 8,9,10 ft? Got a Plastimo dealer near you or chandlery?

https://www.plastimo.com/en/avirons-brittania.html



Bought oars will likely be on the robust side, but nothing that can't be pared down if needed or weighted in the handle to counterbalance.

[Yeadon]

http://www.grapeviewpointboatworks.com/order_oars.html

You can also get oars at the lumberyard. Some assembly required.

[dbp1]

To be fair to OP, I can see the appeal to buying them, even if you can make them. A boat is lots of (relatively) small parts, any one of which you can screw up and fix (with little consequence aside from time). (obviously, some parts are bigger / have more consequences than others!). Oars seem a bit different: while they aren't a big project, if you screw up towards the end, there may not be much you can do to fix aside from starting over.

[jpatrick]

To be fair to OP, I can see the appeal to buying them, even if you can make them. A boat is lots of (relatively) small parts, any one of which you can screw up and fix (with little consequence aside from time). (obviously, some parts are bigger / have more consequences than others!). Oars seem a bit different: while they aren't a big project, if you screw up towards the end, there may not be much you can do to fix aside from starting over.

I disagree. If they're made of wood, then they can be fixed although one may choose not to if the repair requires a lot of effort. I made many a dandy screw-up during my pro woodworking career and I was able to fix them all.

Jeff

[StevenBauer]

I need to get/make some cheapo oars. I just can’t bring myself to leave Mary’s fancy Shaw And Tenny oars on the dinghy rack down at East End Beach. It’s hard enough leaving the HumbleBee there. But if I don’t leave some oars down there we can’t ride the bikes down to go sailing.
And the 7’ Moose Point oars at Hamilton Marine are $63.79 each. I just haven’t been able to walk out the door with a pair.

[MushCreek]

I just ordered a pair of 7'6" spoons from Van Fancy. Even with the high cost of shipping, they're much cheaper than Shaw & Tenney. They'll be here in about 6 weeks. Time will tell if the quality is there.

[amish rob]

I need to get/make some cheapo oars. I just can’t bring myself to leave Mary’s fancy Shaw And Tenny oars on the dinghy rack down at East End Beach. It’s hard enough leaving the HumbleBee there. But if I don’t leave some oars down there we can’t ride the bikes down to go sailing.
And the 7’ Moose Point oars at Hamilton Marine are $63.79 each. I just haven’t been able to walk out the door with a pair.

Dang. I got a couple pairs you could choose from…

[pvg]

What about...
http://www.clcboats.com/shop/product...n-oar-loc.html

[NeilMB]

6705170[/URL]]I need to get/make some cheapo oars. I just can’t bring myself to leave Mary’s fancy Shaw And Tenny oars on the dinghy rack down at East End Beach. It’s hard enough leaving the HumbleBee there. But if I don’t leave some oars down there we can’t ride the bikes down to go sailing.
And the 7’ Moose Point oars at Hamilton Marine are $63.79 each. I just haven’t been able to walk out the door with a pair.

If you want something to leave on the dinghy rack, how about a pair of Mik Storer’s Goat Island Skiff oars? https://storerboats-2pcvbeepenn1.net...AR9FT-2020.pdf

They are drawn 9 feet long but I think we can figure out how to shorten them, yes? Curved blades are laminated 3mm ply, but when I made his canoe version I bent 6mm ply across the grain with no problem.

Or, if you want something simpler, these have flat plywood blades, unlike Storer’s spooned ones.

5FB279B9-BA76-4228-AE36-3F414C1AAD0F.jpg

[WI-Tom]

I just ordered a pair of 7'6" spoons from Van Fancy. Even with the high cost of shipping, they're much cheaper than Shaw & Tenney. They'll be here in about 6 weeks. Time will tell if the quality is there.

I've heard good things about them. But then, my brother made me a set of oars for my birthday before I got around to ordering from them, so I don't really know.

Tom

[Rigadog]

i watched a video where a guy too a pair of cheap thick oars and sculpted them with a flap disc. Interesting...

[Ben Fuller]

I need to get/make some cheapo oars. I just can’t bring myself to leave Mary’s fancy Shaw And Tenny oars on the dinghy rack down at East End Beach. It’s hard enough leaving the HumbleBee there. But if I don’t leave some oars down there we can’t ride the bikes down to go sailing.
And the 7’ Moose Point oars at Hamilton Marine are $63.79 each. I just haven’t been able to walk out the door with a pair.

Couple of options: a bronze locking device to lock them into the tender. I have one around here some where that you can have for rehoming kit. I can bring it to Blue Hill if you are going to be there. You can also look at the simple horrible oars used for inflatables and the like. Don't know how they compare in price to Wayne's.

[jpatrick]

I need to get/make some cheapo oars. I just can’t bring myself to leave Mary’s fancy Shaw And Tenny oars on the dinghy rack down at East End Beach. It’s hard enough leaving the HumbleBee there. But if I don’t leave some oars down there we can’t ride the bikes down to go sailing.
And the 7’ Moose Point oars at Hamilton Marine are $63.79 each. I just haven’t been able to walk out the door with a pair.

As an alternative, could you fashion a trailer of sorts for the oars? Maybe even a simple clamp-on set of wheels and lash the other end to the bicycle.

Jeff

[ahp]

How el cheapo do you want to be? How far do plan on rowing? Have you considered using curtain rods with plywood blades bolted to the end? I have seen them used in China, and they work. They won't be pretty, but I doubt they will be stolen.

[Bobcat]

As an alternative, could you fashion a trailer of sorts for the oars? Maybe even a simple clamp-on set of wheels and lash the other end to the bicycle.

Jeff

I like the idea of towing a pair of oars tied to a skateboard. Going around corners would be wild!

[pvg]

Couple of options: a bronze locking device to lock them into the tender. I have one around here some where that you can have for rehoming kit. I can bring it to Blue Hill if you are going to be there. You can also look at the simple horrible oars used for inflatables and the like. Don't know how they compare in price to Wayne's.

See the link in post #12 ;-)

[stromborg]

But if I don’t leave some oars down there we can’t ride the bikes down to go sailing.

Add a red flag or two and away you go!

[SalsDad]

I need to get/make some cheapo oars. I just can’t bring myself to leave Mary’s fancy Shaw And Tenny oars on the dinghy rack down at East End Beach. .

My wife's Shaw&Tenneys are on display in our home most of the time. My "$2.44 oars" (plus some inflation in 10 years) can be left anywhere without fear they will walk away

You can do remarkable things with a Home Depot 2x4! Plan on making a bunch at a time, as there is a bit of a learning curve on the band saw.
46266570-5C6B-411F-8C5D-8B8EFFE71DBD.jpegEE625D04-07BE-4EB2-99C4-0F215F26CF5B.jpeg81FA1F00-16E0-43C4-AA63-04F67168F3DD.jpeg