Page 2 of 2 FirstFirst 12
Results 36 to 41 of 41

Thread: Another Ilur in Vert Mont!

  1. #36
    Join Date
    Dec 2018
    Location
    Vermont
    Posts
    23

    Default

    Okay, I'm working on the inner stem bevel. There is a projection on the lower portion of the stem that's not depicted in the drawing, am I missing something?

    Sent from my Pixel 3 XL using Tapatalk

  2. #37
    Join Date
    Jan 2020
    Location
    Hansville, Wa., USA
    Posts
    269

    Default Re: Another Ilur in Vert Mont!

    Hi Remi, Iím not sure what you are asking, but I can show you what I did on my inner stem.

  3. #38
    Join Date
    Dec 2018
    Location
    Vermont
    Posts
    23

    Default Re: Another Ilur in Vert Mont!

    Nice work on the stem, David! A picture is worth a thousand words, on the attached photo, the bump at the bottom of the stem is in question. I see that you removed it, but why is it there anyway?

    inner stem bevel.jpg

  4. #39
    Join Date
    Jan 2020
    Location
    Hansville, Wa., USA
    Posts
    269

    Default Re: Another Ilur in Vert Mont!

    Ok, I see what your question is. There is a reason for that extra material. If you use the stem to form the false outer stem the strips will follow that form over that extra material. It is too much of a bend without that material. My kit didn’t have that extra material so I used a wedge. The final trim of the false stem will cut that off to match the keel. I ended up not using the inner stem to make the false stem. I made a form out of plywood.

  5. #40
    Join Date
    Jan 2020
    Location
    Hansville, Wa., USA
    Posts
    269

    Default Re: Another Ilur in Vert Mont!

    Once your fa
    se stem is made that extra material has to come off so the keel lays flat on the stem.

  6. #41
    Join Date
    Dec 2018
    Location
    Vermont
    Posts
    23

    Default Re: Another Ilur in Vert Mont!

    You're right! I remember it when laminating the false stem. Thx

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •