Results 1 to 13 of 13

Thread: Burrill White Fir for boat building?

  1. #1
    Join Date
    Jun 2007
    Posts
    824

    Default Burrill White Fir for boat building?

    I'm in the midst of building one of Dave Gentry' SOF designs, the Great Wicomico canoe and am looking for wood for the stringers and gunwales. The plan calls out vertical grain Western Red Cedar. Not real common in these parts (northern NJ.) Even if I could find I'd be a bit hesitant because two of the intended canoe passengers will be somewhat large rambunctious dogs so durability and splintering comes to mind.

    For the past couple years I've noticed Home Depot has been marketing Burrill White Fir as a premium stud. This is the only place I've ever seen white fir and I've been to lots of lumber yards. A lot of it is vertical grain and a little digging in the stacks will turn up completely knot free boards. Most of the studs have a smattering of small pin knots. I'm wondering about the suitability of this for boat building. I can't find much information about durability, rot resistance, etc. It's light and stiff and presumably strong. I'm pretty sure I can coax it into the shapes needed for the canoe.

    So, does anyone have experience using this wood in boats?

  2. #2
    Join Date
    Dec 2003
    Location
    Portland, Oregon
    Posts
    72,399

    Default Re: Burrill White Fir for boat building?

    Don't know that exact species. While many, but not all, of the firs will be more rugged and durable than western red cedar, the only one I know of that offers rot-resistance - if that matters to you - is douglas fir (which isn't strictly part of the fir family). The combination of light weight with rot resistance is why designers usually specify wrc for such applications.

    Also - it's hard to imagine that wrc wouldn't be available in NJ?
    David G
    Harbor Woodworks
    https://www.facebook.com/HarborWoodworks/

    "It was a Sunday morning and Goddard gave thanks that there were still places where one could worship in temples not made by human hands." -- L. F. Herreshoff (The Compleat Cruiser)

  3. #3
    Join Date
    Nov 2011
    Location
    Salt Spring Island, BC
    Posts
    7,905

    Default Re: Burrill White Fir for boat building?

    Burrill is a brand name. There are several varieties of white fir, all of them somewhat harder and stronger than red cedar and so long as the boat is stored dry should work just fine, but they are quite rot prone. Doug Fir will be harder, stronger, more rot resistant and heavier. Look thru wide framing lumber, there will be some with fairly tight and clear grain on one or both sides of the heart.

    https://kobi5.com/news/local-news/ho...-lumber-14491/

    You can harden red cedar up some with a couple of coats of epoxy.

    If you're going to use okoume for the frames you may as well use the equally rot prone species for the stringers.
    Last edited by Gib Etheridge; 04-16-2021 at 11:36 PM.

  4. #4
    Join Date
    Dec 2003
    Location
    Portland, Oregon
    Posts
    72,399

    Default Re: Burrill White Fir for boat building?

    Quote Originally Posted by Gib Etheridge View Post
    Burrill is a brand name. There are several varieties of white fir, all of them somewhat harder and stronger than red cedar and so long as the boat is stored dry should work just fine, but they are quite rot prone. Doug Fir will be harder, stronger, more rot resistant and heavier. Look thru wide framing lumber, there will be some with fairly tight and clear grain on one or both sides of the heart.

    https://kobi5.com/news/local-news/ho...-lumber-14491/

    You can harden red cedar up some with a couple of coats of epoxy.

    If you're going to use okoume for the frames you may as well use the equally rot prone species for the stringers.
    One small correction. There are more than one species of fir that are equally as soft as western red cedar. I'm working with one example now - 'Silver Fir'.

    Also - in terms of 'hardening' wrc - I'd not coat it with any sort of film. If anything, I'd soak it liberally with polymerizing oil (boiled linseed or tung)... or an oil/varnish blend. Something that will soak in a tad, then harden (polymerize) WITHOUT forming a film (which, over a soft substrate like wrc, can fracture like an eggshell on impacts).
    David G
    Harbor Woodworks
    https://www.facebook.com/HarborWoodworks/

    "It was a Sunday morning and Goddard gave thanks that there were still places where one could worship in temples not made by human hands." -- L. F. Herreshoff (The Compleat Cruiser)

  5. #5
    Join Date
    Jun 2007
    Posts
    824

    Default Re: Burrill White Fir for boat building?

    Quote Originally Posted by David G View Post
    it's hard to imagine that wrc wouldn't be available in NJ?
    You'd think this would be the case, what with all the home builders here, but clear, VG WRC at the retail level is scarce.

    Quote Originally Posted by Gib Etheridge View Post
    Burrill is a brand name. There are several varieties of white fir, all of them somewhat harder and stronger than red cedar and so long as the boat is stored dry should work just fine, but they are quite rot prone. Doug Fir will be harder, stronger, more rot resistant and heavier. Look thru wide framing lumber, there will be some with fairly tight and clear grain on one or both sides of the heart.

    https://kobi5.com/news/local-news/ho...-lumber-14491/

    You can harden red cedar up some with a couple of coats of epoxy.

    If you're going to use okoume for the frames you may as well use the equally rot prone species for the stringers.
    Gib, thanks for the info about WF being rot prone, this is the kind of info I'm looking for.

    Sorry for confusion on the name, I should have mentioned the Burrill-is-a-brand thing. (Oddly enough, the white fir is harvested by Burrill in the Northwest but only sold by HD in the Northeast and Phoenix AZ, go figure)

    I'm making the frames out a piece of Hydrotek I have laying around. The canoe will be stored dry but the idea of rot prone wood on a boat just doesn't sound right. I have a VG DF 2x10 that I've been saving for some project so I may just reduce the scantlings a little and use that.

    http://forum.woodenboat.com/showthre...t=#post5931998

  6. #6
    Join Date
    Oct 2000
    Location
    Padanaram, MA USA
    Posts
    9,972

    Default Re: Burrill White Fir for boat building?

    Try a better lumber yard.
    WRC is widely used as decking.
    Last edited by JimConlin; 04-17-2021 at 07:11 AM.

  7. #7
    Join Date
    Sep 2015
    Location
    Viroqua, Wisconsin
    Posts
    380

    Default Re: Burrill White Fir for boat building?

    Quote Originally Posted by JimConlin View Post
    Try a better lumber yard.
    ... if you can find one. They’re out there but not nearly as common as they were even ten years ago, sadly.

    Growing up in the ‘60’s I can remember five or six independents within 20 miles of home (25 miles NW of Chicago metro) besides the ubiquitous Edward Hines in every town.

    Where I live now there’s exactly one in town besides a hardware store (where I work part-time) that has a lumber shed, both stocking basic construction materials. Menards & HD are 30+ miles north.

  8. #8
    Join Date
    Jan 2012
    Location
    downward bound
    Posts
    7,419

    Default Re: Burrill White Fir for boat building?

    It’s April 2021 Lumber on the exchange has gone up 50% in a month, a 2*4*8’ is $8 at menards, demands been high for a year and we are heading into building season. Any “good” lumber yard that has a huge selection for reasonable prices isn’t long for the business.

  9. #9
    Join Date
    Jun 2007
    Posts
    824

    Default Re: Burrill White Fir for boat building?

    Quote Originally Posted by sp_clark View Post
    ... if you can find one. They’re out there but not nearly as common as they were even ten years ago, sadly.

    Growing up in the ‘60’s I can remember five or six independents within 20 miles of home
    So true, Unfortunately HD and Lowes have decimated the local yards by offering cut rate crap to the un-discerning masses, who are really to blame. Seems like a race to the bottom.

    I can find VG WRC if I'm willing to drive but I'm not sold on WRC for my purposes. The intent of my thread is to get a better understanding of white fir and whether it's suitable for my project.

  10. #10
    Join Date
    Dec 2003
    Location
    Portland, Oregon
    Posts
    72,399

    Default Re: Burrill White Fir for boat building?

    If you find nothing local - Boulter in Boston will likely ship you what you need.
    David G
    Harbor Woodworks
    https://www.facebook.com/HarborWoodworks/

    "It was a Sunday morning and Goddard gave thanks that there were still places where one could worship in temples not made by human hands." -- L. F. Herreshoff (The Compleat Cruiser)

  11. #11
    Join Date
    Dec 2006
    Location
    Groove City
    Posts
    9,609

    Default Re: Burrill White Fir for boat building?

    Condons in White Plains is still around, I am pretty sure, not far from north Jersey.
    Steve Martinsen

  12. #12
    Join Date
    Feb 2001
    Location
    Seattle, WA USA
    Posts
    13,980

    Default

    Most decent lumber yards should have CVG Western Red Cedar. It's usually sold for trim work. Expect to pay for it, though.

    These guys have CVG western red cedar as well. They're in Fairfield NJ.

    https://www.woodboardsandbeams.com/cedar

    Atlantic White Cedar would be the local equivalent for your canoe I think. These guys in Medford, NJ have it.

    https://www.cedarspecialties.com/atl...ar_lumber.html
    You would not enjoy Nietzsche, sir. He is fundamentally unsound. — P.G. Wodehouse (Carry On, Jeeves)

  13. #13
    Join Date
    Feb 2001
    Location
    Seattle, WA USA
    Posts
    13,980

    Default Burrill White Fir for boat building?

    White fir is abies concolor.

    It, like most other "white woods" used for construction lumber, is "rated as non-durable to perishable regarding decay resistance, with little resistance to insect attacks."

    That rating is based on heartwood. What you are almost certainly getting at Home Depot is second-growth sapwood, which will be worse than that.

    https://www.wood-database.com/white-fir/
    Last edited by Nicholas Carey; 04-18-2021 at 02:58 PM.
    You would not enjoy Nietzsche, sir. He is fundamentally unsound. — P.G. Wodehouse (Carry On, Jeeves)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •