If anyone has one of these engines would you be able to take a photo and post please. I need to know how the cable connects at fuel injection pump on the engine. Manual is no good and I’m waiting for a reply from supplier too.
Ta
If anyone has one of these engines would you be able to take a photo and post please. I need to know how the cable connects at fuel injection pump on the engine. Manual is no good and I’m waiting for a reply from supplier too.
Ta
This pic is from a three cylinder kubota tractor. Does it look similar to your Nanni?
In my limited experience the general layout remains the same no matter how many cylinders are involved.
![]()
There is nothing quite as permanent as a good temporary repair.
If you get stuck, consider strings instead of cables.
I have them on both my diesel boats.
For throttle, shifting gears and stop.
Yes it does look similar Stiletto. I’ll go have another look to see if I can find the bracket that holds the end of outer cable. Thanks
Looks like two cable connections, throttle and shut off, they may be push-pull cables, i.e. solid inner wire.
(internet says this is N2-14?)
30CD7E7F-E68A-4B33-AC6A-803D17A8FD6E.jpeg
Yes that’s it Canoe. I just had a thought. The fuse box came mounted on a bracket which was loose just sitting on top of engine but in my haste to install engine I’ve cut that bracket up to mount it on engine bay wall not thinking it may have a dual purpose. Doh, now it occurs to stupid me that it’s probably the missing piece of puzzle. So now I’ll have to fashion something to replace it.
Double DOH.
Thanks all.
Looks like the gear shift and throttle brackets are set up for Teleflex/Morse type 33c cables.
Clones of these cables are readily available in half meter increments.
Well I’m a happy little Chappy now. Problem solved thanks to pic in #5 . I went and had another look at engine and that bracket under air cleaner is there, it is not visible from above though.
you gotta love this forum and a special thanks to Canoe.
i just went had a look through install and operator manual but besides one general view of the starboard side of engine showing that bkt., there is no other mention of what it is or how to set it up.
YES, YES YYYYEEEEESSSSSSSSSS.
Last edited by Andrew Donald; 11-28-2020 at 06:53 PM.