Results 1 to 25 of 25

Thread: Terrapin - a box boat in a box

  1. #1
    Join Date
    Feb 2006
    Location
    Pennsylvania
    Posts
    8,027

    Default Terrapin - a box boat in a box

    I drove down to Annapolis today and picked up a heavy 4'x8' pallet at Chesapeake Light Craft. The parts, almost all precut to size, for a balance lug version of Autumn Leaves. Here's how far I've gotten on day one:

    This is a lot of wood. Ply on the bottom, crated-up bundles of spar, stringer and other stock on top. In the car, many gallons of epoxy.

    The kit.jpg

    Removed from the pallet and spread out in the garage/workshop. Lots of pieces to assemble, but many, many hours of work already done. Much of it due to the wonders of computers and CNC machines.

    Parts unloaded.jpg
    -Dave

  2. #2
    Join Date
    Feb 2006
    Location
    Pennsylvania
    Posts
    8,027

    Default Re: Terrapin - a box boat in a box

    Here's the profile of the finished boat, drawn up by John Harris as a variation of the canoe-yawl rigged original version of Autumn Leaves. My kit is the first to this variation. The first with the original rig is being shipped to Colorado. Another boat is being built directly from the plans and is almost completed.

    It's not everyone's cup of tea, I know. Despite the traditional look shown here, it's a Bolger-inspired sharpie hull with plumb sides, square sections. But it's also a boat that answers my current desires: a boat that's small enough to row but big enough to offer a dry and comfortable cabin. Also, a boat that's at home in the shallowest of water. Given this, and the double-ended boxy shape of the thing, mine will be called Terrapin.

    Autumn Leaves - profile-w.jpg
    -Dave

  3. #3
    Join Date
    Mar 2002
    Location
    Duncan, Vancouver Island
    Posts
    28,051

    Default Re: Terrapin - a box boat in a box

    I was hoping someone around here would build one.
    There is no rational, logical, or physical description of how free will could exist. It therefore makes no sense to praise or condemn anyone on the grounds they are a free willed self that made one choice but could have chosen something else. There is no evidence that such a situation is possible in our Universe. Demonstrate otherwise and I will be thrilled.

  4. #4
    Join Date
    Sep 2017
    Location
    Waterford, WI. USA
    Posts
    2

    Default Re: Terrapin - a box boat in a box

    I’ve studied this plan on the CLC site many times and very much like what I see -
    and dream up - with this boat. I’m looking forward to watching this build develop Thanks fobr /> sharing the build.

  5. #5
    Join Date
    Sep 2017
    Location
    Waterford, WI. USA
    Posts
    2

    Default Re: Terrapin - a box boat in a box

    Sorry my last line there came out so crazy. I don’t know how that happened this is a total thumbs up from me!

  6. #6
    Join Date
    Mar 2002
    Location
    Duncan, Vancouver Island
    Posts
    28,051

    Default Re: Terrapin - a box boat in a box

    Quote Originally Posted by Woodeye60 View Post
    Sorry my last line there came out so crazy. I don’t know how that happened this is a total thumbs up from me!
    There is an 'Edit Post' option at the bottom of each of your posts if you ever want to correct any errors in a previous post
    There is no rational, logical, or physical description of how free will could exist. It therefore makes no sense to praise or condemn anyone on the grounds they are a free willed self that made one choice but could have chosen something else. There is no evidence that such a situation is possible in our Universe. Demonstrate otherwise and I will be thrilled.

  7. #7
    Join Date
    Feb 2006
    Location
    Pennsylvania
    Posts
    8,027

    Default Re: Terrapin - a box boat in a box

    No problem, Woodeye. I use the edit feature all the time. I'm itching to get started on the boat, but we've got a family week at the beach coming up, and it turns out I picked up the materials before the final instructions and plans for my version are complete. But in a week and a day or two, I should be able to start assembling. In the meantime, here's my plan for the color scheme. (Colors here shown on the standard version, mine will have an extended cabin trunk and two portlights each side.)

    Waterline view-green.jpg
    -Dave

  8. #8
    Join Date
    Nov 2014
    Location
    Seattle, WA
    Posts
    2,394

    Default Re: Terrapin - a box boat in a box

    Neat project! CNC-cut, ready-to-assemble boats really appeal to my software engineer brain somehow, even though my first love is for traditional plank-on-frame craft. I'm looking forward to seeing this one come together.

    As the the "thumbs down" icon that shows up sometimes - I'm pretty sure that's a bug in the editor. It seems to happens when a word ends in "er" or maybe other cases - I haven't been able to pin it down. I've run into it as well. No solution I've found except to change the word. Maybe something Scot can fix.

  9. #9
    Join Date
    Jan 2012
    Posts
    22

    Default Re: Terrapin - a box boat in a box

    Congratulations the anticipation must be keen! You couldn't have picked a more engaged and interested designer than you have in John Harris, and it is a great leg up having all that cutting done. As for the design, I think it's a super intriguing piece of work. Please keep sharing!

  10. #10
    Join Date
    Mar 2010
    Location
    central cal
    Posts
    13,250

    Default Re: Terrapin - a box boat in a box

    You think that boat is green? You should see the tone of my jealous rage.

    This boat is a cool set of compromises for the right places.

    Itís not the right boat for me, for here, for now, but itís still a neat concept and design.

    Enjoy!

    Peace,
    Robert

  11. #11
    Join Date
    Mar 2007
    Location
    East Quogue,NY
    Posts
    15,220

    Default Re: Terrapin - a box boat in a box

    Excellent, Wox!

    I like the look of this boat. Looking forward to seeing you bring it together.

    Kevin
    There are two kinds of boaters: those who have run aground, and those who lie about it.

  12. #12
    Join Date
    Jul 2017
    Location
    Toodyay, Western Australia
    Posts
    477

    Default Re: Terrapin - a box boat in a box

    The design looks fun. With all those pre cut pieces there will be so much less noise and dust, that has to be a good thing.

  13. #13
    Join Date
    Feb 2006
    Location
    Pennsylvania
    Posts
    8,027

    Default Re: Terrapin - a box boat in a box

    Back from a family vacation and getting things moving.

    When I was a kid cereal boxes had perforated punch-out parts on the back to make things. Locomotives, airplanes, animals. It's where I learned to "Put Tab A into slot B." This project reminds me of that.

    On the sawhorses, bulkhead 2. The bulkhead was CNC cut, of course. My only job is to glue down some pre-cut stock and trim it to fit.l The edges will need bevels too, of course. Against the wall in back, bulkheads 3 and 4 wait their turn on the sawhorses. On the floor, the inside face of one of the two centerboard cases is glassed and curing.

    Is this cheating at boat building -- only doing half the job? I dunno and don't care much. I'm having fun and look forward to a launch date that will likely arrive before the onset of senility. One thing surprised me -- CLC provides an HIN with this kit. I can register it as a purchased boat, as opposed to a home-built boat. So perhaps I'm not building it at all, just sticking together a few parts picked up from the real builder, Chesapeake Light Craft.

    IMG_20180711_161248.jpg
    -Dave

  14. #14
    Join Date
    Aug 2015
    Location
    Santa Fe NM
    Posts
    230

    Default Re: Terrapin - a box boat in a box

    Great!! I will watch with pleasure.

    Building your own boat out of wood these days. No not cheating at all, getting a sizable head start, Yes.
    "Yeah, well, that's just, like your opinion man"
    -The Dude-

  15. #15
    Join Date
    Jan 2000
    Location
    Portland, Maine
    Posts
    16,241

    Default Re: Terrapin - a box boat in a box

    I’m looking at those curves, very nice curves. Them I’m looking at the the hull shape. Then the curves. The hull. Then I get it! Those curves are the interior of the boat.

    Actually, I really like this design and will follow along with interest.

  16. #16
    Join Date
    Nov 2014
    Location
    Seattle, WA
    Posts
    2,394

    Default Re: Terrapin - a box boat in a box

    ^^^ That took me a minute as well. I thought at first that Wox was using the scrap instead of the work piece

  17. #17
    Join Date
    Feb 2006
    Location
    Pennsylvania
    Posts
    8,027

    Default Re: Terrapin - a box boat in a box

    Quote Originally Posted by cstevens View Post
    ^^^ That took me a minute as well. I thought at first that Wox was using the scrap instead of the work piece
    I could do something like that. Those two pieces against the wall to the right of the corner are scrap cutouts. Hmmm. Frames for a tender? At any rate, this boat probably has more curves inside than out.
    -Dave

  18. #18
    Join Date
    Jan 2012
    Posts
    22

    Default Re: Terrapin - a box boat in a box

    Good box boat designs mete out beautiful curves like good poets use rhymes: the skilled practitioner picks the right spots and makes them count!

  19. #19
    Join Date
    Nov 2014
    Location
    Seattle, WA
    Posts
    2,394

    Default Re: Terrapin - a box boat in a box

    Quote Originally Posted by Woxbox View Post
    I could do something like that. Those two pieces against the wall to the right of the corner are scrap cutouts. Hmmm. Frames for a tender? At any rate, this boat probably has more curves inside than out.
    Now THAT would be some clever CNC engineering. Lay out the parts for a tender in the scraps from the big boat.... I like it!

  20. #20
    Join Date
    Nov 2008
    Location
    Blue Marble 3rd Rock From Sun
    Posts
    1,280

    Default Re: Terrapin - a box boat in a box

    Full-size model building it seems. I am watching with great enthusiasm. I'm not hung up on the traditional ways of boat building. I do greatly respect those that have the talent and patience to lovingly handmake almost every single piece on a boat be it an 8-foot dink or 80-foot ocean voyager.

  21. #21
    Join Date
    Dec 2001
    Location
    Too far inland.
    Posts
    8,529

    Default Re: Terrapin - a box boat in a box

    ooooo I'm going to like this thread!
    No adversary is worse than bad advice.

  22. #22
    Join Date
    Feb 2004
    Location
    Texas
    Posts
    10,176

    Default Re: Terrapin - a box boat in a box

    Very, very cool. I think the boat looks like a total joy to own and sail. I could envision owning something similar someday. I like the internal lead ballast as opposed to water ballast. There is not much to dislike about the boat. Good choice.

  23. #23
    Join Date
    Oct 2009
    Location
    Juneau, Alaska
    Posts
    4,470

    Default Re: Terrapin - a box boat in a box

    Cool project Dave. I'm looking forward to following along.
    -Jim

    Sucker for a pretty face.
    1934 27' Blanchard Cuiser ~ Amazon, Ex. Emalu
    19'6" Caledonia Yawl ~ Sparrow

    Getting into trouble one board at a time.

  24. #24
    Join Date
    Aug 2009
    Location
    New Hampshire
    Posts
    1,292

    Default Re: Terrapin - a box boat in a box

    Quote Originally Posted by Woxbox View Post

    Is this cheating at boat building -- only doing half the job?
    NO, it's not cheating. You're using the tools and technology that are currently available to build your boat.

  25. #25
    Join Date
    Aug 2015
    Location
    Santa Fe NM
    Posts
    230

    Default Re: Terrapin - a box boat in a box

    Quote Originally Posted by callsign222 View Post
    NO, it's not cheating. You're using the tools and technology that are currently available to build your boat.
    Didn’t they used to ship broken down boats from Norway to Scotland, for assembly in Scotland? So nothing new here, a continuation of great traditions.
    Last edited by Matt young; 07-13-2018 at 07:06 AM.
    "Yeah, well, that's just, like your opinion man"
    -The Dude-

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •