Page 2 of 2 FirstFirst 12
Results 36 to 55 of 55

Thread: Simmons Sea Skiff 18 in Missouri

  1. #36
    Join Date
    Jul 2005
    Location
    st.louis mo.
    Posts
    72

    Default Re: Simmons Sea Skiff 18 in Missouri

    Nice! I get it, I need to plan the layout.
    Simmons Sea Skiff build photos here:
    https://photos.app.goo.gl/vxuQDZI0Dz7qjzAx1

  2. #37
    Join Date
    Jun 2008
    Location
    hood river oregon rgods4@msn.com
    Posts
    82

    Default Re: Simmons Sea Skiff 18 in Missouri

    You're more than welcome! I can guarantee you will really like this approach.... I call it my "Revolutionary HOT GLUE GUN METHOD". I know it gave me very good results. It gives you a chance to set gaps, spacings, etc, even tho you'll probably have to fine tune some areas for final fit. But it sure beats cardboard/paper/etc to try and do this!!! Each pattern can also be cut apart and wood pieces salvaged for next pattern. Helps reduce overall time/cost/material.
    General Rule Of Thumb = layout longest "main" sticks first. Work out from them. Might have to temporarily clamp or nail sticks in place. Large patterns will more than likely require stiffeners or it could break when being transported. Gap around hogback about 1/16"; gap at strakes - you'll have to hand fit a few times. Don't make fits so snug you end up fighting them....keep 'em loose and you'll love it. The sticks used for making patterns for cutting frames: I liked 10", with some shorter 4"ers.
    I love watching the photos of builds. Very exciting and I can always learn more. You're doing great. Keep up the excellent work.

  3. #38
    Join Date
    Jul 2005
    Location
    st.louis mo.
    Posts
    72

    Default Re: Simmons Sea Skiff 18 in Missouri

    I Made a little progress yesterday, after a trip to the Hardwood lumberyard for some red Oak and Sapele. I got the floors notched for the centerline cleat and a coat of epoxy on the floors and interior bottom.
    Attached Images Attached Images
    Simmons Sea Skiff build photos here:
    https://photos.app.goo.gl/vxuQDZI0Dz7qjzAx1

  4. #39
    Join Date
    Jun 2008
    Location
    hood river oregon rgods4@msn.com
    Posts
    82

    Default Re: Simmons Sea Skiff 18 in Missouri

    What can I say? Very nice! I like! And here I thought I was the only crazy one. Glad you liked my idea. In my mind this center "cleat"/hogback thing does 2 things....gives a great landing for the floorboards; and I think it adds considerable stiffness right down the middle. It's like have two keels. Keep up the good work! I'm really impressed.

  5. #40
    Join Date
    Jul 2005
    Location
    st.louis mo.
    Posts
    72

    Default Re: Simmons Sea Skiff 18 in Missouri

    I like the Idea a lot, seems it will stiffen the Keel and the Floor boards, I toying with the Idea of using magnets to hold the floor boards in place.
    Simmons Sea Skiff build photos here:
    https://photos.app.goo.gl/vxuQDZI0Dz7qjzAx1

  6. #41
    Join Date
    Jun 2008
    Location
    hood river oregon rgods4@msn.com
    Posts
    82

    Default Re: Simmons Sea Skiff 18 in Missouri

    I love it! Don't laugh....machinists (is this the right word?) use "on" "off" magnets for holding dials in place when using the drill press/etc. I think you're on to something here. Electromagnets could be just the ticket.....(again, is that the correct word?) Switched at the helm. I've tried my limited abilities and I'm just going with screws. Have to carry a screw driver as part of my boat mechanic's kit.

  7. #42
    Join Date
    Jul 2017
    Location
    west haven ct
    Posts
    3

    Default Re: Simmons Sea Skiff 18 in Missouri

    I built an 18 SSS 2 years ago. I used Carnell's plans and WB's Ellis Rowe's article. I was very disappointed on launch day to find that my 210 pounds seated off center to starboard as in the original and Rowe profoundly lowered starboard freeboard. I tore out everything and relocated the fuel tank enclosure, the steering console and storage box/seat pedestal down the center line. It seems to me that the narrow forebody of this hull is very sensitive to weight distribution or maybe I'm just too chunky! Hope this helps you.

  8. #43
    Join Date
    Jul 2005
    Location
    st.louis mo.
    Posts
    72

    Default Re: Simmons Sea Skiff 18 in Missouri

    Thanks George! that does help, and very timely. I am a bit heavier than you so I will rethink my positioning! I'm heading out to the shop right now to start laying things out.
    Do you have any pictures you could post or email me? I would be very interested to see ho you did yours.
    Simmons Sea Skiff build photos here:
    https://photos.app.goo.gl/vxuQDZI0Dz7qjzAx1

  9. #44
    Join Date
    Jul 2017
    Location
    west haven ct
    Posts
    3

    Default Re: Simmons Sea Skiff 18 in Missouri

    She is shrink wrapped for winter and I don't have any photos. I had the 12 gallon tank used by Rowe so I turned that lengthwise down the keel and forward of the beam less 6". The tank, 72 lbs of gas, it's enclosure/seating and the 16"x21"x36" console/battery box (group 24) which is part of the rear face of the gas tank enclosure help balance me and a separate seat pedestal/tackle box located just aft of the console. I have plenty of room and my partner has the front of the boat to himself. The boat behaves beautifully, high and dry and stable in as rough as I will risk on Long Island Sound. There are some photos of center console SSSes on the SSS site. Trust them not Rowe.

  10. #45
    Join Date
    Jun 2006
    Location
    US
    Posts
    3,477

    Default Re: Simmons Sea Skiff 18 in Missouri

    Quote Originally Posted by georgec5 View Post
    She is shrink wrapped for winter and I don't have any photos. I had the 12 gallon tank used by Rowe so I turned that lengthwise down the keel and forward of the beam less 6". The tank, 72 lbs of gas, it's enclosure/seating and the 16"x21"x36" console/battery box (group 24) which is part of the rear face of the gas tank enclosure help balance me and a separate seat pedestal/tackle box located just aft of the console. I have plenty of room and my partner has the front of the boat to himself. The boat behaves beautifully, high and dry and stable in as rough as I will risk on Long Island Sound. There are some photos of center console SSSes on the SSS site. Trust them not Rowe.
    Good point,,, Sadly many builders have been guided by those articles to their own misfortunes.
    Happy trails to you.

  11. #46
    Join Date
    Jul 2017
    Location
    west haven ct
    Posts
    3

    Default Re: Simmons Sea Skiff 18 in Missouri

    Thanks for affirming Erster. And thanks for having advised me, when I was building mine, not to permanently secure the floors. It has worked out very well. NB figo.

  12. #47
    Join Date
    Jun 2008
    Location
    hood river oregon rgods4@msn.com
    Posts
    82

    Default Re: Simmons Sea Skiff 18 in Missouri

    I too used Rowe's article, but only using the pix and descriptions to help me figure out just how to conquer the questions I had about a particular phase of the build. Only 'off center' weight in my 22 is me on the starboard helm; but to help counteract that, I placed one of my two tanks on center, and the other just a little to the port. As to the 'sensitive' nature of the 18', I think I'd agree. The smaller the object, the easier it is to get things off kilter. With my 22, I've been somewhat concerned about that, but only when she's in the water will I know.

  13. #48
    Join Date
    Jul 2005
    Location
    st.louis mo.
    Posts
    72

    Default Re: Simmons Sea Skiff 18 in Missouri

    Well after three or so months of being away from the boat to work on my house I'm back at it. I have completed the 3rd plank on both sides and started fitting the floors. I have also mocked up a center console out of cardboard.
    Hopefully I'll get alot done over the rest of the summer.
    Attached Images Attached Images
    Simmons Sea Skiff build photos here:
    https://photos.app.goo.gl/vxuQDZI0Dz7qjzAx1

  14. #49
    Join Date
    Jun 2008
    Location
    hood river oregon rgods4@msn.com
    Posts
    82

    Default Re: Simmons Sea Skiff 18 in Missouri

    welcome back! It's been too long. Very nice progress photos. I'm affirming GEORGEC5's decision to not permantly attach floorboards. Mine are attached using #10 x 1 1/2" bronze screws set with bronze 'finishing washers'. I like the look. And, as of yet, the little 'bump' they make don't seem to be a 'tripping' issue.

  15. #50
    Join Date
    Jun 2008
    Location
    hood river oregon rgods4@msn.com
    Posts
    82

    Default Re: Simmons Sea Skiff 18 in Missouri

    Issue of hanging strakes with hardly any clamps.....using "strake hangers", it's a snap. Here's how I hung mine: started out with lots of clothespin clamps + hangers, but on all subsequent strakes, only one clamp at transom, and one at stem; only hangers in between. Strakes hang true and snug to the strake lap.002.jpg003.jpg004.jpg005.jpg001.jpg

  16. #51
    Join Date
    Jun 2008
    Location
    hood river oregon rgods4@msn.com
    Posts
    82

    Default Re: Simmons Sea Skiff 18 in Missouri

    hangers thickness match thickness of strake...in this case, 1/2" for each hanger piece. I used some card stock to space hanger pieces where they lap so they would fit just snugly down over the prior strake. In my 22, six hangers was fine. 004.jpg Once strake sat overnight, I used #8 x 7/8" bronze screws to tie thru the lap joint every 3 or 4" along the straighter lap section aft, and 3" as bow curve began.

  17. #52
    Join Date
    Jun 2008
    Location
    hood river oregon rgods4@msn.com
    Posts
    82

    Default Re: Simmons Sea Skiff 18 in Missouri

    about all those clothespin clamps...they just sat gathering dust, so I gave them away.

  18. #53
    Join Date
    Jul 2005
    Location
    st.louis mo.
    Posts
    72

    Default Re: Simmons Sea Skiff 18 in Missouri

    I got a little more work done yesterday, The elevated casting / seating platforms in the rear. This was a lot of cutting and fitting even using templates!
    Attached Images Attached Images
    Simmons Sea Skiff build photos here:
    https://photos.app.goo.gl/vxuQDZI0Dz7qjzAx1

  19. #54
    Join Date
    Jun 2008
    Location
    hood river oregon rgods4@msn.com
    Posts
    82

    Default Re: Simmons Sea Skiff 18 in Missouri

    oh, wow! takes me a little to get my breath back. Soooo nice. Keep on with the great work. Hope my postin the strake hangers were helpful. When you're ready to do your side frames (unless you're going frameless), check out my site on Simmons Sea Skiff "revolutionary method" for doing side frames.....it's more 'pattern making'. But I'm really liking your work!

  20. #55
    Join Date
    Jul 2005
    Location
    st.louis mo.
    Posts
    72

    Default Re: Simmons Sea Skiff 18 in Missouri

    Thanks! I will do that!
    Simmons Sea Skiff build photos here:
    https://photos.app.goo.gl/vxuQDZI0Dz7qjzAx1

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •