This is a continuation from this thread. Basically a half size test platform for a one-off, that may also,in this size, make a single handed camping boat.
Decided that the quickest method was not the cheapest, and that anything that floats with over 700lbs in it, can not be built too lightly either, so this is a compromise on time and material costs.
First job was getting out 2 layers of keel from edge glued boards, 2 on the base and 3 on the interior.
Used the plywood pattern for the base, and cut the top layer a bit smaller to give the plywood skin something to land on. Then glued up both together and added frame floors.