I epoxied the 10oz cloth to my Simmons hull yesterday. But it took so long to get it all done (including entertaining the kids and running to store for more epoxy!), that I was not able to apply a second coat while the first was still hot. So the cloth is down but not filled and the epoxy is fully cured. Is that a problem? Will my second coat to fill the weave adhere properly? normally you'd need to abrade the epoxy to make a mechanical connection if it's fully cured, but I can't do that into the fiberglass.
Also, assuming a 2nd coat ill be fine, do I need to wash this to remove amine blush? There's no way to really tell if there is any.