stanley screw-mate/alternative

[slim]

Having practically given up on finding a genuine screw-mate, I am trying to find an alternative, i.e. a drill/countersink with an adjustable cutter for the body hole. All the big (and, sadly) little hardware outlets seem to stock only those useless bits which have either a very short non-adjustable body-hole bit or none at all. If anybody knows where I can find a stock of the discontinued Stanley tool, or something comparable, you will save me changing drills and making this extra operation for over 2,000 holes per boat.

[slim]

Having practically given up on finding a genuine screw-mate, I am trying to find an alternative, i.e. a drill/countersink with an adjustable cutter for the body hole. All the big (and, sadly) little hardware outlets seem to stock only those useless bits which have either a very short non-adjustable body-hole bit or none at all. If anybody knows where I can find a stock of the discontinued Stanley tool, or something comparable, you will save me changing drills and making this extra operation for over 2,000 holes per boat.

[Thad]

Slim, if you find more than you need send them my way. I have called and e-mailed Stanley to try to get same with no response!

[Thad]

Slim, if you find more than you need send them my way. I have called and e-mailed Stanley to try to get same with no response!

[Joel Herzel]

Fuller makes all manner of sizes of both the countersink and matching drills. Tapered drills, straight drills, all very good quality. I use the Veritas tapered plug cutters with them. Jamestown Distributors has them all.
www.jamestowndistributors.com

[Joel Herzel]

Fuller makes all manner of sizes of both the countersink and matching drills. Tapered drills, straight drills, all very good quality. I use the Veritas tapered plug cutters with them. Jamestown Distributors has them all.
www.jamestowndistributors.com

[slim]

Having practically given up on finding a genuine screw-mate, I am trying to find an alternative, i.e. a drill/countersink with an adjustable cutter for the body hole. All the big (and, sadly) little hardware outlets seem to stock only those useless bits which have either a very short non-adjustable body-hole bit or none at all. If anybody knows where I can find a stock of the discontinued Stanley tool, or something comparable, you will save me changing drills and making this extra operation for over 2,000 holes per boat.

[Thad]

Slim, if you find more than you need send them my way. I have called and e-mailed Stanley to try to get same with no response!

[Joel Herzel]

Fuller makes all manner of sizes of both the countersink and matching drills. Tapered drills, straight drills, all very good quality. I use the Veritas tapered plug cutters with them. Jamestown Distributors has them all.
www.jamestowndistributors.com