homeslap
haha, I knew y'all couldn't avoid that thread title.
I'm looking to purchase some silicon bronze screws, probably from Jamestown Distributers. My question: How many screws per box, from them? Is it 100?
Thanks,
Paul
[ 11-23-2005, 07:20 PM: Message edited by: Paul Pless ]
homeslap
haha, I knew y'all couldn't avoid that thread title.
I'm looking to purchase some silicon bronze screws, probably from Jamestown Distributers. My question: How many screws per box, from them? Is it 100?
Thanks,
Paul
[ 11-23-2005, 07:20 PM: Message edited by: Paul Pless ]
homeslap
haha, I knew y'all couldn't avoid that thread title.
I'm looking to purchase some silicon bronze screws, probably from Jamestown Distributers. My question: How many screws per box, from them? Is it 100?
Thanks,
Paul
[ 11-23-2005, 07:20 PM: Message edited by: Paul Pless ]
Senior Member
Yes......
Senior Member
Yes......
Senior Member
Yes......
homeslap
thankyou Gary
homeslap
thankyou Gary
homeslap
thankyou Gary
Like my hat?
From what I can see and have been told, Hamilton Marine has bettah prices...check it out -
Frearson 8 x 2.5 silicon bronze screws
Hamilton = $22.50/100
Jamestown = $25.80/100
10 x 2.5 Frearsons
Hamilton = $31.98
Jamestown - $33.14
I ordered my 10 x 2.5 bronze Frearson screws from Jamestown before I was told (here, of course!) about Hamilton.
Like my hat?
From what I can see and have been told, Hamilton Marine has bettah prices...check it out -
Frearson 8 x 2.5 silicon bronze screws
Hamilton = $22.50/100
Jamestown = $25.80/100
10 x 2.5 Frearsons
Hamilton = $31.98
Jamestown - $33.14
I ordered my 10 x 2.5 bronze Frearson screws from Jamestown before I was told (here, of course!) about Hamilton.
Like my hat?
From what I can see and have been told, Hamilton Marine has bettah prices...check it out -
Frearson 8 x 2.5 silicon bronze screws
Hamilton = $22.50/100
Jamestown = $25.80/100
10 x 2.5 Frearsons
Hamilton = $31.98
Jamestown - $33.14
I ordered my 10 x 2.5 bronze Frearson screws from Jamestown before I was told (here, of course!) about Hamilton.
Senior Member
It costs a lot more than that for a good screw around here
Senior Member
It costs a lot more than that for a good screw around here
Senior Member
It costs a lot more than that for a good screw around here
Senior Member
Perhaps screws alone are simply cheaper at one or the other, but it seems that price differences vary across the fastener line of these two vendors. If the difference (and quantity) is substantial, as I found recently when ordering boxes of screws, bolts, nuts, and washers, it may pay to order bolts from one, screws from the other, etc...
Neither vendor can touch wholesale prices, though....we all could use a friend with a commercial account.
Senior Member
Perhaps screws alone are simply cheaper at one or the other, but it seems that price differences vary across the fastener line of these two vendors. If the difference (and quantity) is substantial, as I found recently when ordering boxes of screws, bolts, nuts, and washers, it may pay to order bolts from one, screws from the other, etc...
Neither vendor can touch wholesale prices, though....we all could use a friend with a commercial account.
Senior Member
Perhaps screws alone are simply cheaper at one or the other, but it seems that price differences vary across the fastener line of these two vendors. If the difference (and quantity) is substantial, as I found recently when ordering boxes of screws, bolts, nuts, and washers, it may pay to order bolts from one, screws from the other, etc...
Neither vendor can touch wholesale prices, though....we all could use a friend with a commercial account.
Chief Adm!n.
I'd go with Hamilton.
Chief Adm!n.
I'd go with Hamilton.
Chief Adm!n.
I'd go with Hamilton.
Senior Member #6368
Sta-Fast in New Bedford Ma. talk to Pete Despres, tell him you are a boat builder. Also remember higher qty's bring the prices down. [img]smile.gif[/img]
Senior Member #6368
Sta-Fast in New Bedford Ma. talk to Pete Despres, tell him you are a boat builder. Also remember higher qty's bring the prices down. [img]smile.gif[/img]
Senior Member #6368
Sta-Fast in New Bedford Ma. talk to Pete Despres, tell him you are a boat builder. Also remember higher qty's bring the prices down. [img]smile.gif[/img]
old egg owner
Ok, I bought a 1000 box carton from McFeely's silicon bronze #14 by 1 1/2 inch for
Items Total 229.13
S&H is 15.00
Tax is 11.46
Total is 255.59
#14 is a big screw, you can also get 316 SS screws, self tapping #12 3inch long with 1/2 inch head width for 40$ for 100 screws.
old egg owner
Ok, I bought a 1000 box carton from McFeely's silicon bronze #14 by 1 1/2 inch for
Items Total 229.13
S&H is 15.00
Tax is 11.46
Total is 255.59
#14 is a big screw, you can also get 316 SS screws, self tapping #12 3inch long with 1/2 inch head width for 40$ for 100 screws.
old egg owner
Ok, I bought a 1000 box carton from McFeely's silicon bronze #14 by 1 1/2 inch for
Items Total 229.13
S&H is 15.00
Tax is 11.46
Total is 255.59
#14 is a big screw, you can also get 316 SS screws, self tapping #12 3inch long with 1/2 inch head width for 40$ for 100 screws.
Senior Member
I have a box of 100 Silicon Bronze #12 x 1 1/2 that I would sell you for $20.00 plus shipping $3.85. I needed and reordered #8's. Got them from Jamestown about 3 or 4 weeks ago.
Senior Member
I have a box of 100 Silicon Bronze #12 x 1 1/2 that I would sell you for $20.00 plus shipping $3.85. I needed and reordered #8's. Got them from Jamestown about 3 or 4 weeks ago.
Senior Member
I have a box of 100 Silicon Bronze #12 x 1 1/2 that I would sell you for $20.00 plus shipping $3.85. I needed and reordered #8's. Got them from Jamestown about 3 or 4 weeks ago.
If you want to by the really good screws like whittney screw used to make try Goulet specialties in ct. then make U.S. made screws on the same machines whittney used too bad whittney went out but the screws are still avalible they got a website www.oemfasteners.net they are a manufacturer so quantity is always better price but they will sell boxes of 100 and prices are competiive like #10 x 1.5 sq drive was about 21 bucks anyhow hope this help
Luke
If you want to by the really good screws like whittney screw used to make try Goulet specialties in ct. then make U.S. made screws on the same machines whittney used too bad whittney went out but the screws are still avalible they got a website www.oemfasteners.net they are a manufacturer so quantity is always better price but they will sell boxes of 100 and prices are competiive like #10 x 1.5 sq drive was about 21 bucks anyhow hope this help
Luke
If you want to by the really good screws like whittney screw used to make try Goulet specialties in ct. then make U.S. made screws on the same machines whittney used too bad whittney went out but the screws are still avalible they got a website www.oemfasteners.net they are a manufacturer so quantity is always better price but they will sell boxes of 100 and prices are competiive like #10 x 1.5 sq drive was about 21 bucks anyhow hope this help
Luke
how big a screw i missed that one lol you can get a 316 #14 x 3" up 6" if you want at the www.oemfasteners.net all the way up to #24 x 6"
how big a screw i missed that one lol you can get a 316 #14 x 3" up 6" if you want at the www.oemfasteners.net all the way up to #24 x 6"
how big a screw i missed that one lol you can get a 316 #14 x 3" up 6" if you want at the www.oemfasteners.net all the way up to #24 x 6"
Member
Re: Jamestown minimum box size.
Their box size depends on the screw, for example, many small screws only come in 100/bx, but medium size screws can come 10 or 25 or 50/bx, and most large screws and bolts are available 1/bx. Same with corresponding nuts and washers.
Check out their Screw Selection .
I have also had some success by calling them and talking them down to a smaller box size.
Member
Re: Jamestown minimum box size.
Their box size depends on the screw, for example, many small screws only come in 100/bx, but medium size screws can come 10 or 25 or 50/bx, and most large screws and bolts are available 1/bx. Same with corresponding nuts and washers.
Check out their Screw Selection .
I have also had some success by calling them and talking them down to a smaller box size.
Member
Re: Jamestown minimum box size.
Their box size depends on the screw, for example, many small screws only come in 100/bx, but medium size screws can come 10 or 25 or 50/bx, and most large screws and bolts are available 1/bx. Same with corresponding nuts and washers.
Check out their Screw Selection .
I have also had some success by calling them and talking them down to a smaller box size.
Posting Permissions
Reply With Quote