Results 1 to 5 of 5

Thread: Putting in an Airhead: How Hard to Rip out the Old Stuff

  1. #1
    Join Date
    May 2007
    Location
    Seattle
    Posts
    2,929

    Default Putting in an Airhead: How Hard to Rip out the Old Stuff

    I am going to put a composting toilet on Leketoy. I have a holding tank, electric head, and thru hulls with the wiring and plumbing that goes with it.

    How straightforward of a job is ripping the stuff out? Any hints from someone who has done so.

    Does a used electric head have any resale value?
    Last edited by Bobcat; 07-27-2012 at 01:31 PM.
    The cure for everything is salt water - sweat, tears, or the sea
    Isak Dinesen

  2. #2
    Join Date
    May 2006
    Location
    Seattle, WA
    Posts
    523

    Default Re: Putting in an Airhead: How Hard to Rip out the Old Stuff

    A quick one I learned while taking out holding tanks:
    Getting the exposed openings of the tank covered ASAP makes the whole job much more pleasurable. When taking the hoses off the holding tank, I found that after instantly covering the fitting with a gloved hand, one could take the glove off and wrap it inside-out around the hosebarb fitting then tape it quickly to minimize the gas escape. Same with the exposed hose, but there's generally less stink in there to worry about.

    Hope this is useful.
    Quote Originally Posted by Yeadon View Post
    Double-enders are optimistic.

  3. #3
    Join Date
    May 2007
    Location
    Seattle
    Posts
    2,929

    Default Re: Putting in an Airhead: How Hard to Rip out the Old Stuff

    Quote Originally Posted by bott View Post
    A quick one I learned while taking out holding tanks:
    Getting the exposed openings of the tank covered ASAP makes the whole job much more pleasurable. When taking the hoses off the holding tank, I found that after instantly covering the fitting with a gloved hand, one could take the glove off and wrap it inside-out around the hosebarb fitting then tape it quickly to minimize the gas escape. Same with the exposed hose, but there's generally less stink in there to worry about.

    Hope this is useful.
    Now that's the kind of info I wanted. I can't imagine it will be a pleasant job.
    The cure for everything is salt water - sweat, tears, or the sea
    Isak Dinesen

  4. #4
    Join Date
    Jan 2000
    Location
    Egg Harbor Twp, NJ
    Posts
    1,456

    Default Re: Putting in an Airhead: How Hard to Rip out the Old Stuff

    Get yourself some heavy duty contractor trash bags and duct tape for closing up the bags. I use heavy duty rubber gloves when cutting the hoses and nowadays I use my knock off Harbor Freight 29 dollar multi saw for cutting out the hoses. It might be a good idea to leave the sea cocks and thru hulls alone until you make sure you love your composting toilet, seems like some people revert back to holding tanks after a stretch. Some electric heads have resale value, Raritans are usually in demand and can be factory rebuilt.

  5. #5
    Join Date
    Mar 2007
    Location
    East Quogue,NY
    Posts
    4,302

    Default Re: Putting in an Airhead: How Hard to Rip out the Old Stuff

    Agree with Mike. Leave the T-hulls, at least for a while. ( Service and close them, goes without saying


    Kevin
    This new ship here is fitted according to the reported increase of knowledge among mankind. Namely, she is cumbered end to end with bells and trumpets and clocks and wires. It has been told to me she can call voices out of the air or the waters to con the ship while her crew sleep. But sleep though lightly. It has not yet been told to me that the sea has ceased to be the sea.--Rudyard Kipling

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •