What should I do ???? I applied 6 oz fiberglass and epoxy to the bottom of my new build Bluegill skiff. I made up 5 batches of 12 oz of epoxy, because that is the biggest measuring container I had. I either did a poor job of stiring/mixing or measuring hardener and resin. Anyway, one batch did not cure. I partially removed uncured epoxy using a squiggee, rags and alcohol, and rags and acetone. Squiggee, rags and alcohol, and rags and acetone only partially removes epoxy from the fiberglass. What should I do ???? I thought I should just let it set-cure-dry for a day, then apply additional coats of epoxy to fill-in fiber weave.