Page 22 of 22 FirstFirst ... 122122
Results 736 to 763 of 763

Thread: Oughtred - Grey Seal

  1. #736
    Join Date
    Sep 2010
    Location
    Rushworth Australia
    Posts
    2,753

    Default Re: Oughtred - Grey Seal

    Thanks Ian. I’m at the boat now but its slow. Ill give me a slappin” and get back into it soon

  2. #737
    Join Date
    Aug 2002
    Location
    Sydney, Australia
    Posts
    338

    Default Re: Oughtred - Grey Seal

    Good to see you back into it Andrew. Keep the pics and the nice progress happening. Fast is over-rated (in terms of building 'em).
    PeterW

  3. #738
    Join Date
    Dec 2001
    Location
    Northern NSW Australia
    Posts
    70,667

    Default Re: Oughtred - Grey Seal

    Quote Originally Posted by PeterWidders View Post
    Good to see you back into it Andrew. Keep the pics and the nice progress happening. Fast is over-rated (in terms of building 'em).
    Thank God for that !
    '' You ain't gonna learn what you don't want to know. ''
    Grateful Dead

  4. #739
    Join Date
    Mar 2015
    Location
    Dunedin, New Zealand
    Posts
    392

    Default Re: Oughtred - Grey Seal

    Yes, even a little bit each day keeps it moving.
    Ian
    “Old Joke: ‘A bench fitter works to the nearest thousandth of an inch. A loco fitter (steam) works to the nearest inch. A shipwright works to the nearest ship’.”
    Alan Byde, Canoe Design and Construction, Pelham Books, 1978

    “...old maxim, 'A fair line supersedes any given measurement'.”
    Allan H. Vaitses, Lofting, International Marine, 1980

  5. #740
    Join Date
    Sep 2010
    Location
    Rushworth Australia
    Posts
    2,753

    Default Re: Oughtred - Grey Seal

    Hi everyone, thought I’d stick a few more pictures up to show the progress ( or more accurately where I’m up to )
    A shot here of the MDF dummy floor panels which I’m going to replace with ply clad in Dynel and will be fastened down with some pretty clever litttle do-dads in the second picture. The fasteners are the four things on the left and you get a kit of drill bits and a special bit to drill through floor into beam underneath for fitment. I’m going to do that after I’ve painted the panels so I don’t gum up the fittings with paint etc.

    FFA70F5E-B30D-4B77-AC95-02769D5FF943.jpg
    04A4F191-1694-4B27-A7D4-54CC82793997.jpg

    When I get sick of playing with fiddly bits i start another big job so consequently I’ve got about half a dozen things on the go, but its all progress! One of those bigger jobs is fitting out the cockpit with seats and lockers. As the boat has two quarter berths extending back under cockpit ( next pic) I wanted to have curved over edges of seats as it’ll probably be the most used part of the boat. At the left of photo is the lazarette and between that and quarter berths (to the right) I have a space that’ll be cockpit lockers. They will be angled inwards as the cockpit is narrower aft...

    756BD769-2A0C-43A8-8EC2-C1B2CE10FF90.jpg

    I put that router table I made to use here and machined up some timbers to use on the seat
    Attached Images Attached Images

  6. #741
    Join Date
    Sep 2010
    Location
    Rushworth Australia
    Posts
    2,753

    Default Re: Oughtred - Grey Seal

    Meantime Ive still got the shelving task simmering away and when I feel like a change I play with that. On the shelves that are level with waterline its pretty easy to come up with a fiddle design but those angled shelves are using up some 3am zzz’s. You can also see another jobs headway here and that’s the hinged doors on the lockers, this one doesn’t have varnish on yet which is why it looks a little odd. They will have a finger hole for one of those inside catches.

    3AC7A2FC-2276-4FD9-A2C1-AF9F361FDA17.jpg

    Here’s the port side which is part way through with fiddles and yet to have doors

    0422A571-6567-4D89-8546-CAE11E5342D5.jpg

    And lastly I’ve put a shot here of the side deck framing only because I don’t think I’ve put one before

    94D54776-32EE-4AA5-BDC2-6C99C708B587.jpg

    Cant believe I’m saying this but, I’m looking forward to start painting inside cabin and varnishing a few hardwood bits of trim. Cant wait for the contrast of ‘popping’ trim against cream paint.

    See you’se next time

  7. #742
    Join Date
    Nov 2016
    Location
    Everett, WA, USA
    Posts
    448

    Default Re: Oughtred - Grey Seal

    Glad to see the progress. Hope all is well. Looking forward to seeing some paint too.
    Travis.

  8. #743
    Join Date
    Sep 2010
    Location
    Rushworth Australia
    Posts
    2,753

    Default Re: Oughtred - Grey Seal

    Yes alls as well as expected for a plus 50. Thanks for asking Travis.

  9. #744
    Join Date
    Mar 2015
    Location
    Dunedin, New Zealand
    Posts
    392

    Default Re: Oughtred - Grey Seal

    You certainly have not been idle, Andrew. She's all looking very neat. Pleased to see you've got that bit of concavity in the foredeck kingplank, to be compatible with the sheer.
    Yes, a bit of paint will do wonders for your enthusiasm.
    Cheers,
    Ian
    “Old Joke: ‘A bench fitter works to the nearest thousandth of an inch. A loco fitter (steam) works to the nearest inch. A shipwright works to the nearest ship’.”
    Alan Byde, Canoe Design and Construction, Pelham Books, 1978

    “...old maxim, 'A fair line supersedes any given measurement'.”
    Allan H. Vaitses, Lofting, International Marine, 1980

  10. #745
    Join Date
    Sep 2010
    Location
    Rushworth Australia
    Posts
    2,753

    Default Re: Oughtred - Grey Seal

    Thanks Ian, yes its easy enough getting the king plank to shape but the telling bit will be laying the ply on to it, given the athwartships curvature as well. Fingers crossed.

  11. #746
    Join Date
    Feb 2007
    Location
    Port Stephens
    Posts
    17,041

    Default Re: Oughtred - Grey Seal

    Hi Andrew, great progress! You can suspend shelves on little knees on frames and leave a gap off the hull. This makes them easier to clean and paint and they won't trap moisture. Leave a gap under the rail/s at the front too.

    Rick

  12. #747
    Join Date
    Sep 2010
    Location
    Rushworth Australia
    Posts
    2,753

    Default Re: Oughtred - Grey Seal

    Thanks Rick, to be honest I hadn’t paid much attention to future housekeeping maintenance of the shelves except perhaps to put gaps at end of fiddles to sponge out rubbish. I’m trying to picture what you mean by “leave a gap under rail at the front too”. Can you explain further please, do you mean fiddles/?
    I’m picturing biro’s/small bits, rolling off shelves into bilges and that’s why I’ve enclosed them.

  13. #748
    Join Date
    Mar 2015
    Location
    Dunedin, New Zealand
    Posts
    392

    Default Re: Oughtred - Grey Seal

    Hi Andrew,
    To put the foredeck on, you have to do it in two halves. Cut one half a little bit oversize all around, and screw it down temporarily along the inwale. Then kneel on it to force it down against the kingplank. With a wide flexible batten held horizontally cross-wise, and looking straight down on it, mark the centreline. Take the deck-piece off the boat and cut the centreline. It will come out slightly concave. Then you can use it as a pattern for the other side, and do a trial fit of both halves together. The plywood will take a bit of "torturing". You can always glue a trim-piece over the joint, but I'm sure you won't have to.
    Cheers, Ian
    “Old Joke: ‘A bench fitter works to the nearest thousandth of an inch. A loco fitter (steam) works to the nearest inch. A shipwright works to the nearest ship’.”
    Alan Byde, Canoe Design and Construction, Pelham Books, 1978

    “...old maxim, 'A fair line supersedes any given measurement'.”
    Allan H. Vaitses, Lofting, International Marine, 1980

  14. #749
    Join Date
    Sep 2010
    Location
    Rushworth Australia
    Posts
    2,753

    Default Re: Oughtred - Grey Seal

    Thanks Ian, what purpose does the wide batten serve? Do i mark the centre line on it before holding over ply, using the opposite gunwhale as a datum? Do you mean hold it across the boat or for/aft?
    A

  15. #750
    Join Date
    Feb 2007
    Location
    Port Stephens
    Posts
    17,041

    Default Re: Oughtred - Grey Seal

    Quote Originally Posted by andrewpatrol View Post
    Thanks Rick, to be honest I hadn’t paid much attention to future housekeeping maintenance of the shelves except perhaps to put gaps at end of fiddles to sponge out rubbish. I’m trying to picture what you mean by “leave a gap under rail at the front too”. Can you explain further please, do you mean fiddles/?
    I’m picturing biro’s/small bits, rolling off shelves into bilges and that’s why I’ve enclosed them.
    I wouldn't have fiddles, as such. Just have a rail or two along the front to stop things from sliding off. Put all small objects in trays or baskets. Attach the rails only with screws so they're easily removed. In the long run, you'll be very pleased when it comes to cleaning, painting and sanding, and your boat will be better ventilated.

    Rick

  16. #751
    Join Date
    Sep 2010
    Location
    Rushworth Australia
    Posts
    2,753

    Default Re: Oughtred - Grey Seal

    Bugger, don’t you wish I had of asked for alternatives first. Double bugger. What you say makes a lot of sense Rick.

  17. #752
    Join Date
    Feb 2007
    Location
    Port Stephens
    Posts
    17,041

    Default Re: Oughtred - Grey Seal

    I didn't know whether you'd already fitted the shelves. It's not a big deal. You might be able to do something like that with the ones that aren't fitted yet? And it might be possible to adapt what you have. Or just go with what you have and maybe adapt them in the distant future when it's time for some renewal of paint etc.

    Rick

  18. #753
    Join Date
    Mar 2015
    Location
    Dunedin, New Zealand
    Posts
    392

    Default Re: Oughtred - Grey Seal

    By a wide batten, I mean one with a straight edge, and wide enough that it won't edge-set, say 80 or 100 mm.
    Draw the centreline down the middle of the kingplank first. Screw the half foredeck panel around the gunwale and along the kingplank, with the inner (straight) edge of the deck piece at the centreline of the kingplank at each end. (You will have to kneel on it to screw it along the kingplank. The straight edge of the deck piece will appear slightly convex when seen from above, and will be overlapping the c/l in the middle.) Then fasten (hot-melt glue?) the end corners of the batten on the centreline, keeping it level athwartships to keep the inner edge directly above the centreline of the boat, and kneel on the middle of it. Draw the centreline along the deck piece. The line will be concave when you take the piece off the boat and trim the edge. After that you can use the piece as a pattern for the other side. When you force the inner edges down onto the kingplank, they should meet in the middle. I did my Eun Mara foredeck that way with 9mm ply, and it worked OK. Is the GS deck 9 or 12 mm?
    Cheers, Ian
    Last edited by IanMilne; 04-18-2018 at 03:40 PM. Reason: The line will be concave (not convex).
    “Old Joke: ‘A bench fitter works to the nearest thousandth of an inch. A loco fitter (steam) works to the nearest inch. A shipwright works to the nearest ship’.”
    Alan Byde, Canoe Design and Construction, Pelham Books, 1978

    “...old maxim, 'A fair line supersedes any given measurement'.”
    Allan H. Vaitses, Lofting, International Marine, 1980

  19. #754
    Join Date
    Feb 2002
    Location
    Uki, NSW, Australia
    Posts
    25,776

    Default Re: Oughtred - Grey Seal

    Building boats is so much more fun than repairing them...from my experience anyway.
    Lovely job.
    The definition of stupid has got to be the belief that more guns will negate the bloodshed done with guns.

  20. #755
    Join Date
    Mar 2015
    Location
    Dunedin, New Zealand
    Posts
    392

    Default Re: Oughtred - Grey Seal

    I agree.
    Ian

  21. #756
    Join Date
    Sep 2010
    Location
    Rushworth Australia
    Posts
    2,753

    Default Re: Oughtred - Grey Seal

    Quote Originally Posted by IanMilne View Post
    By a wide batten, I mean one with a straight edge, and wide enough that it won't edge-set, say 80 or 100 mm.
    Draw the centreline down the middle of the kingplank first. Screw the half foredeck panel around the gunwale and along the kingplank, with the inner (straight) edge of the deck piece at the centreline of the kingplank at each end. (You will have to kneel on it to screw it along the kingplank. The straight edge of the deck piece will appear slightly convex when seen from above, and will be overlapping the c/l in the middle.) Then fasten (hot-melt glue?) the end corners of the batten on the centreline, keeping it level athwartships to keep the inner edge directly above the centreline of the boat, and kneel on the middle of it. Draw the centreline along the deck piece. The line will be concave when you take the piece off the boat and trim the edge. After that you can use the piece as a pattern for the other side. When you force the inner edges down onto the kingplank, they should meet in the middle. I did my Eun Mara foredeck that way with 9mm ply, and it worked OK. Is the GS deck 9 or 12 mm?
    Cheers, Ian
    Thanks for clearing that up Ian. BTW its 12mm

  22. #757
    Join Date
    Sep 2010
    Location
    Rushworth Australia
    Posts
    2,753

    Default Re: Oughtred - Grey Seal

    Quote Originally Posted by WX View Post
    Building boats is so much more fun than repairing them...from my experience anyway.
    Lovely job.
    Yes I can imagine Gary. When you built did you epoxy coat the ply? Just trying to learn why you’re having so much trouble

  23. #758
    Join Date
    Feb 2002
    Location
    Uki, NSW, Australia
    Posts
    25,776

    Default Re: Oughtred - Grey Seal

    Quote Originally Posted by andrewpatrol View Post
    Yes I can imagine Gary. When you built did you epoxy coat the ply? Just trying to learn why you’re having so much trouble
    3-4 coats of Everdure inside and out. My trouble was and is still the result of 15 years of neglect under a tarp. I'm going to do one more big haul out in a few months that should see an end to it all and with luck a far better boat in which to coastal cruise.
    The definition of stupid has got to be the belief that more guns will negate the bloodshed done with guns.

  24. #759
    Join Date
    Sep 2004
    Location
    Munich, Germany
    Posts
    205

    Default Re: Oughtred - Grey Seal

    Hi Andrew,

    the boat is looking fantastic. The moment when color goes on really is a special one: Formerly separated building elements are integrated and out comes - a boat. Looking forward to this.
    Thomas
    -----------------------------------
    panta rei

  25. #760
    Join Date
    Sep 2010
    Location
    Rushworth Australia
    Posts
    2,753

    Default Re: Oughtred - Grey Seal

    Good luck Gary, I know a little how you feel, my projects take about 10 times longer than originally planned too.

    Thanks Thomas, glad to have you on board. I am a huge fan of Paul Gartside so much so I recently almost engaged him to draw me a plan set for a 28’ cutter but due to my current build and too many other things on my ‘bucket list’ I pulled out. Hence my interest in your build.

  26. #761
    Join Date
    Jan 2010
    Location
    Northern Europe
    Posts
    8,988

    Default Re: Oughtred - Grey Seal

    Nice progress Andrew. The large radius finish on your cockpit seat edge is worthwhile i reckon, nice looking bit of timber too, what is that? . Cockpit locker-lid-drainage always seems to be a lot of work, look forward to seeing how you do yours.

  27. #762
    Join Date
    Sep 2010
    Location
    Rushworth Australia
    Posts
    2,753

    Default Re: Oughtred - Grey Seal

    Hi Ian, That’s Douglas Fir about 30rings/inch. I’m looking forward to figuring out the drainage too. I’m putting it on the back burner for a bit while I get it straight in my head. Painting in cabin before hand.

  28. #763
    Join Date
    Mar 2015
    Location
    Dunedin, New Zealand
    Posts
    392

    Smile Re: Oughtred - Grey Seal

    You might have to clamp down the 12mm foredeck pieces harder than just kneeling on them, but I'm sure you'll do it alright.
    Ian
    “Old Joke: ‘A bench fitter works to the nearest thousandth of an inch. A loco fitter (steam) works to the nearest inch. A shipwright works to the nearest ship’.”
    Alan Byde, Canoe Design and Construction, Pelham Books, 1978

    “...old maxim, 'A fair line supersedes any given measurement'.”
    Allan H. Vaitses, Lofting, International Marine, 1980

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •