I've got this beast of a trailer that came with my boat. It's been sitting at the marina yard for the last two years because we have simply blocked the boat off instead of putting in on the trailer so that we could do the bottom work a lot easier.
Long story short. I want to rejuvenate this trailer. My question is; does anyone have dimensions/specs for how the bunks should be positioned for a 25' Lyman? There are bunks already on the trailer but they are old and bent. They were never the "fixed" type, they are bolted to the frame so that they can move a little.
What I want to do is strip the trailer and get fixed bunks onto the trailer so that they are rigid and stiff with no movement.
As questioned above, does anyone have specs and or recommendations as to how to go about this the best way?
I have attached a few links to images of the trailer with the boat on it. IF need be I can snap a couple of photos of the trailer this weekend when I'm at the marina if it makes it easier to determine what to do.
I have 3 weeks to get the trailer out of the yard otherwise the guy is going to start charging me for storage! I told him to just pretend the boat is ON the trailer! Bah it was a short laugh!
See images below:
This link is will take you to images of the whole project from 2 years ago, (for browsing purposes)