Page 1302 of 1302 FirstFirst ... 30280212021252129213011302
Results 45,536 to 45,552 of 45552

Thread: Antipodean Boats Connection

  1. #45536
    Join Date
    Aug 2017
    Location
    Melb, Vic, Aus
    Posts
    341

    Default Re: Antipodean Boats Connection

    You could always coat the end grain with bitumen paint.

  2. #45537
    Join Date
    Feb 2007
    Location
    Port Stephens
    Posts
    17,920

    Default Re: Antipodean Boats Connection

    Reckon that would work? Might make it pretty goopy to walk on on hot days. Maybe something similar that stays hard?

    Rick

  3. #45538
    Join Date
    Apr 2010
    Location
    South Australia and Tasmania
    Posts
    16,340

    Default

    I noticed a board walk down at Robe is done with that recycled plastic stuff. Looks OK..

    Sent from my CPH1851 using Tapatalk

  4. #45539
    Join Date
    Aug 2017
    Location
    Melb, Vic, Aus
    Posts
    341

    Default Re: Antipodean Boats Connection

    You can get a water based one. Dries hard

  5. #45540
    Join Date
    Apr 2010
    Location
    South Australia and Tasmania
    Posts
    16,340

    Default

    Surprising number of wooden boats at Port Fairy. You can buy the black one for $40,000. Or less.

    Sent from my CPH1851 using Tapatalk

  6. #45541
    Join Date
    Feb 2014
    Location
    Sunshine Coast, QLD
    Posts
    1,401

    Default Re: Antipodean Boats Connection

    Oooh, I like that (predictably).

  7. #45542
    Join Date
    Feb 2007
    Location
    Port Stephens
    Posts
    17,920

    Default Re: Antipodean Boats Connection

    Quote Originally Posted by Geftb View Post
    You can get a water based one. Dries hard
    Okay, I'll have a look - thanks! Decided to change the order to 1.5" thick boards. Dearer than the 1", of course but actually cheaper than 30mm as the mill would have high setup costs to mill a non-standard thickness.

    Port Fairy is nice.

    Rick

  8. #45543
    Join Date
    Sep 2005
    Location
    new zealand
    Posts
    3,404

    Default Re: Antipodean Boats Connection

    Quote Originally Posted by RFNK View Post
    So...... where is it?

    Last week Auspost told me the gearbox would arrive yesterday. Then this week they told me it would arrive next week, so I've been whingeing about it all week. But it arrived today! Tomorrow morning I'll go out and see if it works. Expect lots of asterisks and stuff if it doesn't.

    Rick
    Well?

    Pete
    Don't underestimate the power of stupid people in large numbers!

  9. #45544
    Join Date
    Feb 2007
    Location
    Port Stephens
    Posts
    17,920

    Default Re: Antipodean Boats Connection

    All good! A bit of a fiddle to get the shaft coupling back on and I had to make some new cover plate studs so I could fit the control cable bracket but ..... it works! I ran the boat against the mooring in forward and reverse for a while just to be sure but, it all seems fine. I'll head out on a calmer day just to make sure it's all smooth etc. but it seems really good at this point.

    I've posted this on the Nanni thread but apparently the selector fork was shot and so were some of the clutch plates. The guy's replaced the fork, cover plate and gearing and assures me that it's all really good now. Seems so to me. I'm really pleased to be past this hurdle!

    I hope Gypsie is making some progress with his engine issues. This engine I have is great. I hadn't run it for about 2 weeks. When I turn the ignition on, I can't even hear it turning over - it just starts instantly. I'm so pleased with it!

    Rick

  10. #45545
    Join Date
    Apr 2010
    Location
    South Australia and Tasmania
    Posts
    16,340

    Default

    Woo hoo!

    Sent from my CPH1851 using Tapatalk

  11. #45546
    Join Date
    Feb 2014
    Location
    Sunshine Coast, QLD
    Posts
    1,401

    Default Re: Antipodean Boats Connection

    Excellent and yay!

  12. #45547
    Join Date
    Apr 2011
    Location
    Brisbane, Australia
    Posts
    2,679

    Default Re: Antipodean Boats Connection

    Sounds very good. My advice is not to paint with anything, because it will need refinishing often. If you really feel the need to, water based stain but not an oiled based finish. Water based is simply retreated by applying more coats but you'll hide the wood grain. At least you don't have to sand or scrape before the next coat though. With an oil based finish you need to sand and scrape. Yuck. However turps and linseed oil every now and then will keep it water repellent. Not too much linseed oil though or it will encourage mould.
    Flat bottomed boats, you make the rockin' world go round.............

  13. #45548
    Join Date
    Aug 2017
    Location
    Melb, Vic, Aus
    Posts
    341

    Default Re: Antipodean Boats Connection

    New toy. It had a fair old wobble so I modified the base.
    IMG_5681.jpg
    Its not sideways in real life.
    First time owning a band saw. Sooooo much easier the a jig saw I'm finding out
    . IMG_5682.jpg
    I purchased it for all this type of stuff on Comet.

  14. #45549
    Join Date
    Apr 2010
    Location
    South Australia and Tasmania
    Posts
    16,340

    Default

    A new tool is always good.

    Sent from my CPH1851 using Tapatalk

  15. #45550
    Join Date
    Feb 2007
    Location
    Port Stephens
    Posts
    17,920

    Default Re: Antipodean Boats Connection

    A properly set up bandsaw is a great thing to have, that's for sure!

    Rick

  16. #45551
    Join Date
    Apr 2010
    Location
    South Australia and Tasmania
    Posts
    16,340

    Default

    Good looking cleats too.

    Sent from my CPH1851 using Tapatalk

  17. #45552
    Join Date
    Apr 2012
    Location
    Adelaide, South Australia
    Posts
    7,851

    Default

    Boating


    Sent from my iPhone using Tapatalk
    When I first joined WBF they made me write a book to prove I was a real yachty. I was so gullible.
    Paperback E-book

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •