Search:

Potting lead shot is okay, but no where near the density of solid lead, the epoxy between balls doesn't weigh much.

Having been down this rabbit hole, I'll stand by the idea of just getting it...

What Canoeyawl said x2

I have used Pre-Check for years and immediately pre-pandemic upped it to Global Entry because I thought I was going to be traveling to Canada and Mexico a bunch. So much for that...

Well worth the...

I tried this route twice with Marianita's bilgeboards and now have a set of as-designed steel plates weighing close to 100 pounds each.

The first set came in at about 60 pounds each and...

Another vote for leave them alone

https://farm2.staticflickr.com/1883/44396548682_475a1b4b6e_o.jpg

Add a red flag or two and away you go!

I do, but that picture is all Jay Greer

I haven't seen a lot of canvas decks either, though I have been thinking about one on "Next Boat", the 'glass and epoxy deck on Marianita has held up really really well so Bruce's suggestion is in...

You do have some epic riding down there Ted. I don't know what those early road engineers were drinking back in the day but they sure knew how to lay out a road for motorcycles....

https://photos.smugmug.com/Boats/Flapjack-Skiff/i-3j4WSfx/0/ee131d64/L/2022080811081858--3596422244019336786-IMG_2129-L.jpg
...

The KLR?

"The vessel is sold for scrap, restoration, salvage, or another use that will remove the vessel from state waters to a person displaying a business license issued under RCW 19.02.070"

This is...

Duckworks has a pretty good article here https://www.duckworksmagazine.com/06/columns/nichols/index2.htm

I have been messing my my sprit rig lately and will post a picture tomorrow. I laced the...

Almost exactly one year ago we moved into a 1500 square foot house that I built myself over the course of 2 years. Contracted out the foundation, roof and mechanical/electrical but framed, drywalled...

https://photos.smugmug.com/Cars/Bronco/i-xzgPnJr/0/4c3daddc/L/2011%2001%2009%20002-L.jpg
Two doors and a tailgate...

A light glued-ply boat like the Peregrine 18 ought to be fine on a trailer like that. Poking around looking for trailers I get the sense that most of the "off the shelf" types are built to support...

It has been some time since I last dove into the yuloh project. I had been thinking about a manual back-up for Marianita if her motor quit at an inopportune moment or to get through a consistent...

https://photos.smugmug.com/Boats/Kayaks/i-pgRNCfz/0/9bb5d2af/L/Yuloh-L.jpg

2/3? You might be thinking of the yuloh formula above. It will be interesting to see what you turn up, I don't remember...

https://images.craigslist.org/00808_cpfqvjUld9Mz_0kE0fu_1200x900.jpg

Is that parking brake?

Looking at this makes me think about the similarly sized/styled Dunphy hiding under a tarp in my yard...

The current Port of Seattle water temperature is 53F, this after a week long heatwave....While I did jump off the boat a few times last week it was for pretty brief intervals. The 10-12 degree...

That's an interesting question.

I wonder what dry storage for a 35'-40' monohull (which I'm guessing is the range you are looking at) would run in either Florida or the BVIs? Tempting to keep one...

https://photos.smugmug.com/Boats/Eun-Mara/i-QSgmD4k/0/23f92279/L/2014%2008%2027%20003-L.jpg

This is the set up I used to pour my 400-ish pound ballast keel. Roughly 4"x4" and 5'-6" long. Pine box...

Marianita lives in a slip, she comes out once a year for a good clean up and paint. This due to a combination of very limited launching facilities here on Bainbridge and the time it takes to rig and...

Thank you!

We're not saying we're going to deport all these people or whatever. You're free to stay here. You're not going to be forced to convert or anything like this because that's not biblical whatsoever....

Nice indeed. I own what I think is the only other Eun Mara in the area, if you have questions I'll try to answer them.

So the difference between my "not a shooting brake" Rabbit and your Lancia is?....

Maybe is this one of those "Is it a small ketch or a yawl?" arguments that is best had at an extended EBS as the...

I have my own personal utility pole too. Power, telephone and cable run from a pole on the street to my pole and then cut underground. The phone and cable used to cross the 10 feet from pole to house...

https://photos.smugmug.com/Boats/Deer-Isle-Koster/KDI/i-DLBTPkv/0/623e138c/L/2012%2009%2002%20009-L.jpg
This is what I used on Kayli Marie. Halyard tied off to the eye with a prussik on the yard to...

I think the ID of your ring is too small. Having a bit of brain fart this morning but I think the "rule of thumb"number is mast OD+ 10%? Somebody here will know.

The 1/4" 3--strand is probably...

http://forum.woodenboat.com/attachment.php?attachmentid=66056&stc=1&thumb=1&d=1597388594
Hector has come a long way from August 2020 when you started this thread.

http://forum.woodenboat.com/attachment.php?attachmentid=69185&d=1601145605&thumb=1

Remember we're talking about a trailered coastal cruiser here not something expected to cross the North Sea or...

https://photos.smugmug.com/Boats/Kayaks/i-RZTrPtW/0/26089509/L/2022072915485904--3008648824299580819-IMG_2100-L.jpg

I think Jeff was headed in a good direction. The permanent "eave" just needs to...

There is a Customs Office out on Point Hudson if they want more than notification from an app. I would think there is a bit of traffic coming in from Victoria...but even as a natural-born citizen of...

Good old Henry's


2. HAZARDS IDENTIFICATION
Classification
OSHA Regulatory Status
and Canadian Workplace Hazardous Material Information System (WHMIS)
Skin corrosion/irritation Category 2...

Pelican was up for sale in 2017, I think she was on Instagram for a bit but I can't find her now.

When I was sailing a lugger the downhaul and halyard belayed by the mast, but the rig wasn't as far up in the bow as the #130. Hoisting I just tried to fast and smooth, bring it down was a two-handed...

I have a couple of sea kayaks (from the now defunct Pygmy Kayak Co) paddled a few cheap rotomolded ones and higher end fiberglass models. It always seemed the stiffer the better in terms of efficient...

Looks like you found yourself a fun little project/boat. Hopefully as you tear into it your initial assessment pans out. Looking at the PO pictures, compared to some others found on the internet I...

Is there a way to simply lash the cleats on? They look big enough to go a great job catching a sheet at an inopportune moment, you also have the ability to easily relocate if your best first guess...

https://photos.smugmug.com/photos/i-J3kKxMd/0/a6574d8a/L/i-J3kKxMd-L.jpg

Those are cleaning up nicely. I cast some hardware yesterday and I'm hoping a couple of the pits I got will buff out. One...

Thought about it but I was really enjoying my downwind run. It looked like you all stopped for the night in Appletree Cove? Must have been quite a sight and just a bit crowded.

Pfft...

Which party is one aligning themselves with authoritarian/fascist/racist groups?



Borrowed from an article in the Baltimore Sun:
What states have produced the least educated...

That cot solution looks pretty slick.

I was sailing downwind from Kingston/Appletree Cove as the Salish 100 fleet was working upwind. First I had to dodge the salmon fishermen off Jeff Head then...

Not as strong? Hmm...two pieces of wood screwed together either way, not sure it makes enough difference to matter one way or the other. Sternsheets are not exactly a structural piece anyway. Maybe...

https://bringatrailer.com/wp-content/uploads/2022/02/1977_volkswagen_rabbit_77vwrabbit-03-28409.jpg?fit=940%2C626

Feels like the venerable VW Golf/Rabbit/GTI has been under represented here.

It would make a fun casting project. Mine is welded up mild steel, worked it up as a proof of concept that worked so well I never got around to making the "real" one. I imagine Mr. Ledger will grace...

Here in Washington LEOs are certified at the state level and there is a process in place to de-certify them.
...

Leathered gaff jaws? Might I suggest a nice saddle instead?
https://i.pinimg.com/736x/6f/b6/11/6fb611b2823cd8708377838a01c567f7.jpg

I built one (not pictured) for Marianita after breaking the...

I commute in and out of Seattle two or three times a week, my admittedly anecdotal observation is that a lot of folks are still on the road (and in my way) heading into town weekday mornings. Don't...