Ed Harrow
04-13-2003, 08:40 PM
Now, if you look really carefully, on the ground just to the right of Finbar -
http://home.fiam.net/eeharrow/04.13.03.JPG
You'll see a little bit of SNOW! There's still a lot left on the other side of Our Lady, however.
This was "payback" weekend, mostly, taking care of SWMTMH. We were pulling stumps, raking leaves and sand and the like, but I did get a little time in on Phoenix. You'll (at least some of you) remember how, at Dave's and Rodger's suggestion, I set up a center-line wire and took measurements to various bits and locations from bow to stern. One thing I learned was that taking whate were, for me, very detailed notes back when I did this, turned out to be barely detailed enough, now. Let that be a lesson on a project like this, one can't be too detailed in one's record keeping... Anyway, tadaa (sp?) she looks real good. +/- 1/8, maybe a little more, but on the whole looking very good. :cool: smile.gif
So I'm going to get another pair of stands, figure out how to get them in place (not to mention work around them, LOL) and then start on rudder removal. Next time around I'll take a picture of the supports The Lurker and I set up to help support her under the counter and in the stern post area, but I wanted you all to see the last of the snow (well, not really the last, we've got more hidden away ;) )
http://home.fiam.net/eeharrow/04.13.03.JPG
You'll see a little bit of SNOW! There's still a lot left on the other side of Our Lady, however.
This was "payback" weekend, mostly, taking care of SWMTMH. We were pulling stumps, raking leaves and sand and the like, but I did get a little time in on Phoenix. You'll (at least some of you) remember how, at Dave's and Rodger's suggestion, I set up a center-line wire and took measurements to various bits and locations from bow to stern. One thing I learned was that taking whate were, for me, very detailed notes back when I did this, turned out to be barely detailed enough, now. Let that be a lesson on a project like this, one can't be too detailed in one's record keeping... Anyway, tadaa (sp?) she looks real good. +/- 1/8, maybe a little more, but on the whole looking very good. :cool: smile.gif
So I'm going to get another pair of stands, figure out how to get them in place (not to mention work around them, LOL) and then start on rudder removal. Next time around I'll take a picture of the supports The Lurker and I set up to help support her under the counter and in the stern post area, but I wanted you all to see the last of the snow (well, not really the last, we've got more hidden away ;) )