banjoman
04-06-2008, 05:35 PM
Before
http://i193.photobucket.com/albums/z98/brewmastermsu/IMG_0269-1.jpg
After
http://i193.photobucket.com/albums/z98/brewmastermsu/IMG_0749Medium.jpg
http://i193.photobucket.com/albums/z98/brewmastermsu/IMG_0743Medium.jpg
A few places on the deck were patched with fiberglass and/or injected with epoxy.
It was then sanded and faired using West epoxy and microballoons.
We used Kirby's Hull and Deck paint semi-gloss white. 2 coats straight and one with pumice mixed in. It was a little bit of a challenge getting the non-skid smooth but we are happy with the results.
For more information on Starduster...
http://www.woodenboat.com/forum/showthread.php?t=65695&highlight=starduster
Still have the cabin sides and the cockpit to paint but the list is getting shorter....on the exterior at least.
Mike
http://i193.photobucket.com/albums/z98/brewmastermsu/IMG_0269-1.jpg
After
http://i193.photobucket.com/albums/z98/brewmastermsu/IMG_0749Medium.jpg
http://i193.photobucket.com/albums/z98/brewmastermsu/IMG_0743Medium.jpg
A few places on the deck were patched with fiberglass and/or injected with epoxy.
It was then sanded and faired using West epoxy and microballoons.
We used Kirby's Hull and Deck paint semi-gloss white. 2 coats straight and one with pumice mixed in. It was a little bit of a challenge getting the non-skid smooth but we are happy with the results.
For more information on Starduster...
http://www.woodenboat.com/forum/showthread.php?t=65695&highlight=starduster
Still have the cabin sides and the cockpit to paint but the list is getting shorter....on the exterior at least.
Mike