View Full Version : 19 ft Sailboat -progress photos 9-17-07
09-17-2007, 04:57 PM
Well while i am waiting for parts for my driveline I am keeping busy with other details like the rudder and paint.
The dotted lines on the rudder indicate where threaded rods go thru the boards.
<a href="http://tinypic.com" target="_blank"><img src="http://i13.tinypic.com/5zgez5u.jpg" border="0" alt="Image and video hosting by TinyPic"></a>
09-17-2007, 05:31 PM
Ahh, Donald, you have been busy after all. Looking good mate. Nice gleam to that roof.
It looks like there is a capping piece across the lower leading edge of the rudder. Are you sure it will want to stay there? I guess you are convinced that the threaded rods will provide sufficient reinforcement to keep the joint stable. Not doubting, just interested. (O well, yes, ok - I am doubting a tiny bit)
09-17-2007, 07:06 PM
The rudder will get a coat of epoxy and "S" glass and then 6 oz cloth over that. Then 3 coats of resin. I am hoping it will be stong enough then.
Next is the gloss white on the cabin sides and coamings.
I wanted tan not brown but there was almond (they called it sandstone) OR brown (Easy poxy brand)
I tried mixing the almond(sandstone) and brown 50/50 and it looked awful.
We shall see.
09-17-2007, 07:22 PM
Looking good there, Donald. Better put some sand in that deck paint, tho.
Powered by vBulletin® Version 4.2.1 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.