ken_J_@hotmail.com
07-23-2007, 09:24 AM
I'm about to order some wood for my Bobcat project. I've located some beautiful Aracca 1/4" plywood with no voids and beautiful faces. My question is; the plans call for 1/4" but this wood is about a 16th under 1/4" even though it says 1/4" on it. Is is normal for plywood to be a little undersized? Could I safely build with this? It will be sheathed with 6oz cloth on one side and epoxied on the other. What do you think?