Darren McClelland
01-27-2005, 12:25 PM
H
I have some questions, the frames for the palm beach , are they made from solid white oak or did you cut them from plywood, also your first layer of material over the frames was 1/8 plywood then two layers of 1/8 cedar then a fore and aft layer of mahogany that was 3/16. is that correct, or the dimensions different, also did you use a glass cloth on the topsides or just the bottom below the waterline.
Thanks for your time
Darren
I have some questions, the frames for the palm beach , are they made from solid white oak or did you cut them from plywood, also your first layer of material over the frames was 1/8 plywood then two layers of 1/8 cedar then a fore and aft layer of mahogany that was 3/16. is that correct, or the dimensions different, also did you use a glass cloth on the topsides or just the bottom below the waterline.
Thanks for your time
Darren