WB Building & Repair FAQ Ver 2.5

[Jim Hillman]

<font color=FF0000><FONT FACE=”jokerman” SIZEAfter looking through the FAQ I would appreciate very much if you would add a reply to the thread to help keep it on the first page, until other arrangements can be made. Thank You.</FONT>

Wooden Boat Repair Library (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=008279)
Beginners Boat Building Books (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=008322)

Courtesy of Dave Fleming

On Battens For Lofting (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=009564)
On How it was done (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=010098)
On Mentors (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=010097)
On Templates and the making of. (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=010099)
On Deep Hole Drilling (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=010100)
On Sharpening Shipwrights Tools (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=010101)
On Projects (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=010102)
Rust Removal (by Kevin Chamberlain, Member HTPAA) (http://www.htpaa.org.au/article-electro.php)
Wood Handbook--Wood as an engineering material (U.S. Dept. of Agriculture) (http://www.fpl.fs.fed.us/documnts/FPLGTR/fplgtr113/fplgtr113.htm)
Personal View and Opinions (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=010103)
On Misteaks and Boo-boos (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=009132)

Courtesy of Duck Trap Woodworking

Lining Off & Spiling (Recommended) (http://www.duck-trap.com/building.html#anchor312716)

Courtesy of Bob Smalser

Rehabilitating Old Chisels (Big File) (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=008610)
Rehabilitating Old Planes (Revised) (Bigger) (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=008638)
Shop-Made Joiner and Boatwright Tools I (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=4;t=002041)
Shop-Made Joiner and Boatwright Tools II (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=4;t=002040)
Shop-Made Joiner and Boatwright Tools III (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=4;t=002039)
Maintaining Traditional Oil Skins and "Tin" Cloth (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=6;t=001998)
Chopping Mortises - A Quick Tutorial (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=008649)
Milling Earl's Fir (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=5&t=012586)
Milling Earl's Fir - Part 3 of 3 (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=5&t=012687)
The Drawknife (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=009003)
Files, Filing, Filling and Finishing….Metal (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=009048)
Sharpening Handsaws (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=009165)
The Incredibly Versatile Sweep Brace (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=010416)
Rehabbing Wooden Planes (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=009194)
The Haunched and Drawbored Mortise and Tenon Part I (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=010446)
The Haunched and Drawbored Mortise and Tenon Part II (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=010449)
An Inexpensive 50-Degree Smoothing Plane (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=009153)
More Chisels (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=010117)
Fast But Sure Construction (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=6;t=003158)
Repairing and Restoring Varnished Hardwood (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=009010)
Spoke Shave Tune Up (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=008974)
Tuning Card Scrapers (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=009193)
Making Spar Planes Inexpensively (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=010004)
A Simple Pair of Seven-foot Oars (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=009692)
A Simple 3-Board Door (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=009794)
Linder Rigging Knife (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=4&t=002504)
Wiring Harnesses for Small Boats and Trailers (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=009784)
Have a Trashed Chain Saw? (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=4;t=002115)
8-Siding Gage (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=009685)
Making a Better Coping/Dovetail Saw (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=010335)
Basic Sharpening (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=010358)
Wood Chisel Survey for Beginners (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=4;t=002681)
Machine Cut Through Dovetails (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=010550#000000)

Timber Frame (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=5&t=011950)
"Whew!" (Site-Milled Lumber) (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=5;t=015404)
Big Madrone (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=4;t=002338)
Big Madrone 2 ( Into Each Life a Little Rain Must Fall ) (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=009291)
Big Madrone 3 (Pitch Pockets…Bullets…and Slabs) (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=009306)
Cruiser Was a Logger's Dog (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=5&t=012147)
Snow Today At Sprague Pond (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=3;t=001466)
Shop-Made Joiner Tools (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=4;t=002041)
Air Drying Stacks (Revised) (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=009419)
Ring Count (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=009431)
This is topic Are Your Glue Joints Repairable? (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=011982)

Courtesy of Gary Porter

Boatbuild ing Notes Part I (Tips from the Old Hands) (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=008305)
Boatbuild ing Notes Part II (More tips from the Old Hands) (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=008306)

Courtesy of mmd

Laying out a simple compass rose (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=010260)

A - Accuracy, Amputation, Air Tanks

Tale of an Amputation (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=003796)
How big a mistake is OK? (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=000806)
Air tanks (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=4;t=000433)

B - Ballast, Bungs, Bonding, Bouyancy, Bevels, Bilge, Blocks

Concrete ballast (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=000647)
Water Ballast (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=007481)
Setting Bungs (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=001445)
Quick bung remover? (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=002327)
Bonding vs No Bonding (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=005408)
Buoyancy questions (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=005718)
Sanding plugs fair (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=006014)
Cutting running frame bevels, bandsoars, and traditional boatbuilding... (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=006339)
The only cure for a stinky bilge: clean it--REALLY clean it. (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=007931)
Steam-Cleaning the Bilge (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=008367)
Hardware for Wooden Blocks (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=003674)

C - Caulk, Cleaner, Compass, Cleats, Chain, Controls, Centerboard

Caulking - Carvel Planked Boat (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=004146)
Straighten me out (polysulfide veining for lapstrake) (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=005222)
Varnish over 5200 ?? (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=012671)
Deck Caulk (grab that stick, this horse is only kinda dead)) (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=012672)
BoatLife polysulphide caulk (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=003709)
Sodium TriPhosphate question. (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=001451)
Dolphinite bedding compound (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=012878)
Oxalic acid (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=003504)
Cleaning Bilges (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=003411)
Compass Recommendation Please (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=003809)
Uses for Vinegar (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=004997)
Prairie Islander need some cleats... (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=004750)
How best to remove old caulk (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=005059)
Paying seams (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=003684)
Help 5200 in seams (a cautionary tale) (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=006451)
Anchor chain (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=004744)
Boat controls and steering (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=4;t=001680)
Centerboard Construction (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=004113)
Centerboard (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=006507)
Metal centerboards (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=003219)
Waterproofing centerboard (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=001513)
Bolt for centerboard (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=002874)
Centerboard pivot (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=001645)

D - Deck

Getting the deck right (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=001720)
Should I consider a Laid Teak deck? (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=003501)
Laid Deck choices (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=002816)
White Lead (where else could this topic be placed?) (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=003602)
Question for Dave F. and other shipwrights (Deck Seams) (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=005303)
Dumb Woodworking Question of the Day: How do I enlarge a through-deck hole?... (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=007735)
Teak deck - once again (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=007817)
Sugar added to paint as an anti skid. (04-23-2002) “Salt is Hygroscopic” (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=4;t=001072)
Slippery floor in an open boat. (11-28-2002) 1/3 Pine Tar 1/3 Boiled Linseed Oli 1/3 Turps, Deks Olje (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=006073)
Oil on a teak sole (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=4;t=000420)

E - Epoxy, Ergonomics

Epoxy is Crap (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=001156)
CPES yes or no? (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=003129)
Epoxy fillers (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=001416)
Epoxy Virgin (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=001882)
Enhancing Colloidal Silica Effect (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=001935)
The Chemist on Epoxy (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=005831)
Repost of "CPES" (NIA) (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=005862)
Glue spreader (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=001704)
Epoxy VS Resorcinol (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=002660)
Epoxy Fillets (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=003936)
Answer Me This, A Goo Question? (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=004618)
Vacuum 'Bagging' - How to seal the bag (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=004503)
Hot Climate & Epoxy - A Solution! (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=005069)
C.P.E.S. under epoxy, paint & varnish (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=004948)
Uses for Vinegar (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=004997)
Repost of "Aerodux Resorcinol" (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=005861)
Epoxy curing question (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=007041)
Epoxy Pumps and cranks (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=008318)
Epoxy, machine screw repair (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=009142)
Ergonomics (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=2;t=003033)

F - Fastner, Floatation, Frames, Fiberglass

Refastening w/rivets reference (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=001879)
Treenail excerpt (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=007608)
FLOTATION (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=007841)
Help, Chemist (floatation foam) (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=002067)
Drifts (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=001658)
Square Drive Fastners (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=001880)
Breaking Bronze Screws (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=002025)
Re-fastening (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=000613)
Silicone Bronze Screw Breakage (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=002856)
Removing electrolysed bronze screws? (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=002893)
Using Copper Rivets (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=004362)
Mixing bronze with S/S below waterline (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=005095)
Repost "Screws vs. Rivets" (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=005870)
Repost "Salt Water Boat: S. Bronze or Stainless below Waterline?" (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=005868)
Further harpin musings... (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=006515)
Ring frames in trad. construction? (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=006517)
Frames notched into keel or not ? (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=004918)
Removing rusty bolts, lags, etc. (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=006668)
316 ss for plank fastening (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=008008)
Help! My clench nailing is a mess! (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=008092)
Removing Fastenings (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=007736)
Glassing over a carvel planked hull? (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=002783)

G - Gronicles, Gun (swivel)

Gronicles (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=006847)
Bonding Gronicles (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=5;t=006845)
Infamous Swivel Gun Thread (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=5;t=021517)


H - Hinge, Heads, Hat

Where can I get a proper Sailing Hat? (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=011869)
Foredeck hatch hinge placement? (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=001335)
Let's talk s**t...(Heads and Holding Tanks) (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=007526)

J - Joint, Japanese Woodworker

Fundamentals of joint design (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=001291)
Finger joints for planking (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=001262)
Scarf Joints (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=003186&p=)
Stop waters (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=005770)
Thoughts of a Japanese Master Woodworker (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=006137)

L - Keel, Keel Bolts

What keels are made of (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=005401)
Monel instead of bronze for my keelbolts??? (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=005460)

L - Lapstrake, Lofting, Lead, Leather

Glued Lapstrake for larger boats? (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=004525)
Lapstrake daysailer (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=001249)
Lofting ?? (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=007599)
Online tutorial in lofting (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=007403)
A source of cheap lead (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=002167)
300 gallons of water, where did it go? (Getting a Clinker/lapstrake boat wet after six years on the hard) (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=003021)
Lead pouring 101.... (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=004818)
Straigten me out, tell me I'm all wet(re traditional lapstrake construction) (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=005222)
Tips for making feather edge gains (ramp style rabbeted gain) (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=007434)
Oar leather attachment (with a VG link to an illustrated example) (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=003457)

M - Mast, Moving

building a hollow mast (Birds mouth spar) (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=002101)
Building a two or three part hollow wooden mast (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=001303)
How in the world........?(getting the boat built inside - outside) (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=001136)

P - Paint, Pictures, Planking, Planing, Plywood, Pine Tar

Paint (Dave Carnell on Latex paint) (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=012673)
Repost "PRIMER" (NIA) (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=005867)
Cleek on Painting ..Repost (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=005833)
What's the best Paint Stripper... (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=003676)
( How to put) Pictures on the Forum (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=007833)
Traditional Construction Methods (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=005221)
Luan plywood (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=007047)
On the hazards of using MEK (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=001809)
Painting a waterline (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=001933)
Red Lead Primer (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=001308)
Paint II (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=002215)
How much Penetrol (or the like)? (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=004905)
How to plane wide timber for thickness... without proper tools? (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=003814)
Dumb question. Antifouling removal....how? (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=001956)
If a question is not a chemical, can a chemical be a question? Chemist on Paint (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=004957)
For Chemist: Solvents (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=004961)
Doctoring bottom paint... any feedback? (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=004962)
Plywood WITHOUT epoxy? (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=004427)
A useful question about paint, plucked out of Miscellaneous (The Chemist) (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=005612)
Painting/Applying a Name (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=005420)
Repost "Old mahogany raceboat bottoms" (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=005865)
Making red lead from red lead powder (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=005918)
Repost "Plywood" (NIA) (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=005996)
PineTar LinseedOil Turpentine Mixture for Decks...Sticky? (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=006289)
Pine tar, in case you did not know (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=006328)
Basic Painting (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=006246)
How much does a coat of paint weigh? (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=007157)
Gluing thinner plywood sheets to get thicker stock (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=007749)
Glued ply vs riveted timber (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=007748)
Water level for LWL (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=007850)
Bilge Paint (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=005776)

R - Rabbet, Rot, Rail, Rigging, Rudder, Repair

Inspection, Repair, and Maintenance of Wooden Hulls (USCG Site) (http://www.uscg.mil/hq/g-m/nvic/7_95/n7-95.htm)
I need help with Rabbit and Bearding lines (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=002622)
About the ethalene glycol treatment.... (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=001940)
Ethylene Glycol in Epoxy: A study of insidious degradation (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=002241)
Wood Stabilization and Preservation (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=011999)
Smith's Guide to Rot (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=012000)
Pin rail (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=001595)
Salt in bilge (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=011997)
Linseed oil (rot prevention?) (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=003158)
What size rigging? (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=006571)
Advice on mounting Gudgeons & Pintels? (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=007874)
Push / Pull Tiller construction (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=007447)
Mounting Rope Bumper (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=007523)
Scarfing planks onto cabin sides (Dutchman) (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=005258)

S - Survey, Sail, Shaft, Sharpening, Springback, Stem, Spokeshave

"The Survey Says" (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=000744)
gaff sail design (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=001749)
Sail Battens (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=001272)
Loose Footed Gaff Mainsail (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=007239)
cotton canvas sails (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=006523)
Making sails (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=006344)
how to drill prop shaft on the keel? (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=003196)
Slick solution for boring shaft alleys! (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=011998)
Sharp questions (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=011835)
Five-Second Sharpening (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=4&t=001106)
Laminating Springback (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=002005)
Oiling my palm (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=004489)
Black goop to use on wrapped shrouds? (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=004530)
Finishing, Protecting and Setting Up a Sliding Gunter Rig (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=005532)
Laminating an outer stem (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=006850)
Making mast hoops (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=008197)
Spokeshave tune up (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=008974)
The Old Geezer Tries Something New (Scary Sharp) (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=011856)

T - Tools, Transom, Termites, Through-hull

Tool Care - Help for the AR Challenged (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=001630)
Draw Knives (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=001274)
Transom Interior (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=011936)
Pull Saws (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=008291)
Half-adz'ed question (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=004884)
Termites (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=005109)
Cruising tool list (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=008424)
How would you mount a transducer? (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=008309)

V - Varnish

Varnishing Brushes (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=002332)
How many coats of varnish? (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=001366)
Varnish that won't dry (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=001771)
Saving Varnish #2 (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=001947)
Varnishing Brushes (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=002332)
Repost - The Chemist on Varnish (Spraying Varnish I) (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=005832)
Spraying Varnish II (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=003342)
Brushing Liquid (thinning varnish) (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=002956)
Varnishing over old varnish (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=004158)
Varnish Brush (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=004991)
Last coat of varnish? (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=006391)
Varnish woes again (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=006213)
Proper varnish thinning proportion (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=006720)


W - Wood

Which wood? (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=004244)
Kiln-Dried Wood (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=001170)
Old growth lumber Vs what's available now... (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=008335)
Look high or low for crooks, knees, and compass timber? (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=001731)
Anybody ever used Live oak? (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=002141)
Is Elm good wood for boat building? (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=002591)
Black Locust (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=001987)
Wood Electrolysis (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=002546)
Keel/Stem material? (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=003570)
Hackmatack Knees (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=003914)
Cutting big timbers (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=003897)
Seasoning oak (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=005668)
Repost "Red Oak vs. White oak" (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=005866)
Repost "Bending Mahogany" (NIA) (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=005863)
Anyone used Purple Heart for Rub Rails (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=005808)
Best way to have logs cut (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=007771)

After looking through the FAQ I would appreciate very much if you would add a reply to the thread to help keep it on the first page, until other arrangements can be made. Thank You.

[ 12-30-2005, 01:17 PM: Message edited by: Jim Hillman ]

[Jim Hillman]

Many thanks to GregH for saving a copy of the swivel gun thread!

[Ross M]

This is really a great contribution, Jim. I really appreciate it!

Ross

[Jim Hillman]

Thanks to you all for the support.

Jeff just told me that the forum "prunes" old posts, so I'd appreciate reports of any broken links and if you read an old thread that's way back (2002) give it a bump (post) to keep it from getting lopped off.

[Jim Hillman]

Can anyone explain why I can use the "search" function workaround and find threads that, when clicked, no longer exist?

[htom]

Because they've been lost in a forum crash. If google gives you a "cached" link on one of those, use that to get to the most recent version of the thread that google saved.

[Jim Hillman]

Thanks, I'll give that a try.

Where can I get a proper Sailing Hat? (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=011869)

Hardware for Wooden Blocks (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=003674)

[ 06-29-2005, 06:13 PM: Message edited by: Jim Hillman ]

[Jim Hillman]

smile.gif

[ken_nyus]

Transom Interior is a dead link.

[Jim Hillman]

Originally posted by ken_nyus:
Transom Interior is a dead link.Thanks, it's fixed.

[ken_nyus]

"Salt in Bilge" is a dead link.

[ken_nyus]

Slick solution for boring shaft alleys!

also a dead link.

[ken_nyus]

2 more, that's it for today!

Wood Stabilization and Preservation
Smith's Guide to Rot

[stevenj]

Thanks Bob!

Are Your Glue Joints Repairable? by bob smalser (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=011982)

[Jim Hillman]

Fixed and added, thanks guys.

[Miami Mike]

[ 08-01-2005, 02:48 PM: Message edited by: Miami Mike ]

[Jim Hillman]

smile.gif

[Jim Hillman]

[George Ray]

Great list!

[Bruce Taylor]

;)

[pcford]

You have a lot of dead links....at least tonight..

You might try a link checker...Xenu is one. I believe it is freeware.

[Norske3]

smile.gif

[Bob Smalser]

Pouring Lead Rudder/CB Weights (http://www.woodenboat-ubb.com/ubb/ultimatebb.php?ubb=get_topic;f=1;t=012396)

[DavidF]

I wish I read this FAQ more closely. I keep coming back to discover all the stupid things I have done.
Waterproofing centerboard
and
Centerboard pivot
are broke

[formerlyknownasprince]

bump

[BirchBark]

Ka Bump,

I've spent much time reading the threads and articles here and think that it's a great resource for this newbee.

Chris

[Dave Gray]

bump - what is the difference between 2.0 and 2.5?

[dmede]

So if we can get the "Great Googly" linked off the top of the B&R forum why can't we get the FAQ linked?

Is the "Great Googly" link an admission that the search was purposefully shut down in B&R?

[emichaels]

Originally posted by Dave Gray:
bump - what is the difference between 2.0 and 2.5?.5 ha ha

[Jim Hillman]

Dave, I screwed up my login so I had to re-create the FAQ to be able to edit & update it.

I let you guys down, for some reason I did not save the Centerboard Pivot or Weatherproofing threads to my hard drive. I tried to look for them using the "wayback machine" but no luck.

Thanks to all, especially Cosmo for keeping the FAQ on the 1st page.

[DerekW]

bump, thanks.

[Dave Gray]

Jim, these are dead links:
Varnish over 5200?
Deck Caulk (grab that stick, this horse is only...)
Sodium TriPhosphate question
Dolphinite bedding compound
Waterproofing centerboard
Centerboard pivot

That's it for the C section...

[Jim Hillman]

Thanks Dave, I took a couple of hours today to compare what I have saved Vs. what's listed on the FAQ, here's what I'm missing:

Sodium TriPhosphate Question
Dolphinite Bedding Compound
Metal Centerboards
Waterproofing Centerboard
Centerboard Pivot
Getting the Deck Right
Glue Spreader
Re-fastening

Should anyone have saved a copy of one of these threads I'd appreciate it if you would re-post it.

[Dave Gray]

You are a good man, Gunga Din! Kudos and thanks.

[Paul Pless]

bumped

[Ronin NW]

(bump)

[Dave Gray]

bbuuuuummmpppp

[sdowney717]

Dolfinite bedding compund link cache of google, is this it?
http://64.233.187.104/search?q=cache:ugLzQa9-a_gJ:www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi%3Fubb%3Dget_topic%26 f%3D1%26t%3D002820+Dolphinite+Bedding+Compound&hl=en&client=firefox-a

[Ross M]

Bump to get it above V 2.0

[Jim Hillman]

Thanks sdowney717, it's been added. Thanks & Happy New Year to you all!

[Ross M]

Bump-o-rama

[DavidF]

bump

[katiedobe]

Bump

[Dave Gray]

bumpetty bump

[Dave Gray]

bump to 1st page

[Paul Pless]

:cool:

[Figment]

:D

[HOLYSTEEL]

Bump to bring current.

[DavidF]

back up top

[Bill Perkins]

Finding the Waterline (http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic&f=1&t=010516&p=)

[R.I.Singer30]

BUMP

[Dave Gray]

bump

[Ross M]

Bump! Seems like the obsolete version is getting all the bumps!

[Ross M]

Bumpalump

[Ross M]

Babababump

[Bruce Taylor]

I believe Vbulletin allows "sticky" posts.

So, Scot....how about pinning Jim's FAQ to the top of the page?

[stevenj]

I found this thread useful.... could you add it to the 'P' list?

ROLL & TIP
http://www.woodenboat-ubb.com/cgi-bin/UBB/ultimatebb.cgi?ubb=get_topic;f=1;t=012091

steve

[Donn]

The FAQ, she'sa no work no more.

I suspect it has to do with the URL's being called.

Hey Scot...can this be repaired?

[Donn]

I took the thread# on stevenj's link above, and plugged it into the correct URL string, and got an entirely different thread.

This would seem to indicate that all the threads got renumbered in the import to the new software.

Very bad JuJu. Unless Hillman has the original thread titles, it will be difficult to replace all the URLs.

[Dave Fleming]

Does that mean we start over from square one on all the subjects?


I believe I have most of my stuff saved as .doc files and I am quite sure Mr.S. has his saved too but, the rest?????????

[Donn]

I imagine most, if not all, of the threads are still there, but they likely all have new thread numbers. Unless Scot generated a map of old thread numbers to new (which I doubt), or Hillman has a list of the original thread titles, reconstruction will be very difficult.

[clancy]

Other forums that I visit use this software. The administrator can create a "Sticky" to keep a post at the top. Maybe you can ask Scott if it's possible here.

[Donn]

Why sticky it to the top, if it doesn't work? :confused:

[clancy]

I didn't realize it wasn't working when I posted.

[Donn]

The first Dave Fleming FAQ, "On Battens for Lofting."

Jim Hillman used UBB's URL syntax to list the location of the thread.

The UBB syntax works with vBulletin, but the threads on the old forums were re-numbered when they were imported into the new software.

The old thread number, "f=1;t=009664"

The new thread number, "t=2262"

According to Scot, there is no way to translate from the old thread numbers to the new ones, so repair will involve finding each thread, and totally re-writing the FAQs.

Who's up for participating in this project?

[Jim Hillman]

It'll take some time but I can fix it. Since there seems to be no "edit" function I'll have to build it in Wordperfect and then repost it as Ver. 3.0

[Donn]

Jim...at least in a normal post, the edit function is an icon in the lower right-hand corner of the post, on your own threads only. Not sure if it exists on the 'sticky threads.'

Looks like this: http://www.woodenboat-ubb.com/vbulletin/upload/images/buttons/edit.gif

[Jim Hillman]

On Sharpening Shipwrights Tools (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?p=1274017)

[Donn]

Jim and I have started reconstruction. It involves searching for the thread, by title, for each link in the FAQ.

He's working down from the top, and I'm working up from the bottom.

It'd be nice if we could get some volunteers to take a letter or two, and give us a hand.

Some of the best letters are still available!

Any takers?

[clancy]

Count me in, I'll start in the middle "M"

[Ross M]

I did not read Donn's post well. Clancy - are you going to work M down? If so, I will work "L" and up.

Ross

[clancy]

Yes I'm starting @ M and down from there

[Donn]

f-g-h-j-l-w are done

[Bob Smalser]

Here's mine Jim....and thanks again for your efforts. All up to date and tested.




Courtesy of Bob Smalser


Boatbuilding Tool Articles

The Shaving Horse (http://www.woodcentral.com/cgi-bin/readarticle.pl?dir=smalser&file=articles_408.shtml)

Rehabilitating Old Planes (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=3349&highlight=rehabilitating+planes)

Shop-Made Joiner and Boatwright Tools (http://www.woodcentral.com/cgi-bin/readarticle.pl?dir=smalser&file=articles_290.shtml)

The Drawknife (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=211&highlight=drawknife)

Sharpening Handsaws (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=2542&highlight=sharpening+hand+saws)

Rehabbing Wooden Planes (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=4934&highlight=rehabbing+wooden+planes)

More Chisels (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=1176&highlight=chisels)

Have a Trashed Chain Saw? (http://www.woodcentral.com/cgi-bin/readarticle.pl?dir=smalser&file=articles_299.shtml)

Making a Better Coping Saw (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=8245&highlight=chain)

Wood Chisel Survey for Beginners (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=19010)

Tuning Card Scrapers (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=9518)

Rustproofing Tools (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=19372)

8-Siding Gage (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=17860)

Making Lathe Tools (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=1260)

The Incredibly Versatile Sweep Brace (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=372)

Basic Edge Tool Sharpening (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=9336)

Making Spar Planes Inexpensively (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=9360)

Rehabilitating Old Chisels (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=5625)

More Chisels - Lathe-Turned, Leather Washered Handles (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=1176)

An Inexpensive 50-Degree Smoothing Plane, Part I (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=10456)

An Inexpensive 50-Degree Smoothing Plane, Part II (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=425)





Boatbuilding and Woodworking Articles

Dion Work Punt (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=8489)

Maintaining Traditional Oil Skins and Tin Cloth (http://www.woodcentral.com/cgi-bin/readarticle.pl?dir=smalser&file=articles_368.shtml)

The Haunched and Drawbored Mortise and Tenon Part I (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=4480&highlight=haunched)

The Haunched and Drawbored Mortise and Tenon Part II (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=1668&highlight=haunched)

Repairing and Restoring Varnished Hardwood (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=298&highlight=Repairing+Restoring+Varnished+Hardwood)

A Simple Pair of Seven-foot Oars (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=3422&highlight=Simple+Pair+Seven-foot+Oars)

Making Knife and Tool Sheaths (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=19027)

Are Your Glue Joints Repairable? (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=6799)

Gunning Dory Restoration Details (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=8120)

Machine Cut Through Dovetails (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=4319)

Bedding Hardware (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=9382)

Fabricating Mast Bands (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=2266)

Quickie Floorboards (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=4098)

Winch Handle Pocket (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=1223)

Traditional Centerboard and Case – Part I, The Board (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=8948)

Traditional Centerboard and Case – Part II, The Case (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=4871)

Traditional Centerboard and Case – Part III, Installation with a False Bottom (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=4743)

Making a Pipe Rudder (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=849)

Knockdown Tusk Tenons (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=42562)

A Simple 3-Board Door (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=4164)

Wiring Harnesses for Small Boats and Trailers (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=2093)

Files, Filing, Filling and Finishing….Metal (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=9065)




Articles on Lumber Production and Characteristics

Big Fir (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=17609)

Milling Earl's Fir (http://www.woodcentral.com/cgi-bin/readarticle.pl?dir=smalser&file=articles_291.shtml)

Cruiser Was a Logger's Dog (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=17101)

Big Madrone (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=18604)

How Trees are Made (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=42527)

Moving 160-foot Doug Fir Poles (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=45351)

Wood Seasonal Movement (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=5597)

Evaluating Lumber - Ring Count (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=5075)

Stacking and Air Drying Lumber (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=499)

Cedar Siding For Your Boat Shed (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=39667)

Timber Framing with Old-Growth Doug Fir (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=32682)

Hardware Logs (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=8378)

More Hardware Logs (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=4009)

Comparison of Northern White and Western Red Cedars (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=3757)

Snow Today at Sprague Pond (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=16522)

[Jim Hillman]

Maybe it's my machine because when I click on that first link it says "page not found" and the the address bar shows this: http://“http//www.woodcentral.com/cgi-bin/readarticle.pl?dir=smalser&file=articles_408.shtml"

[Donn]

Seasoning oak (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=8805)

[Donn]

Jim...I get the "Big Fir" thread from the link.

I just tested a new URL pasted in from Notepad. I had to eliminate page break spaces from the wordwrap in Notepad, but once done, the link worked.

[Bob Smalser]

All fixed. My above edits all work.

The old WBF software required parens wrapping the url's when using the feature that allowed labels or titles to be applied to urls...and the new software doesn't.

[Donn]

Thanks, Bob. That'll be a big help.

[Bob Smalser]

Some of the old posts no longer have an "edit" button....so they can't be changed at all. That's why I reposted the 2003 Dion Punt thread.

Others can't be changed because the new software only allows 4 pics per post, while the old allowed 8 pics. When attempting an edit on an old 8-pic post, the new software requires deleting or reposting 4 of the pics....and that would make a real mess of the thread.

As a consequence, any links withing my old articles to previous posts no longer work, and I can't fix that.

[JTA]

Black goop to use on wrapped shrouds? (http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=2367)
(http://www.woodenboat-ubb.com/vbulletin/upload/showthread.php?t=2367)

[Whidbey Wherry]

My turn.