F H SilBrz Machine Screws 12-24 x 1" & 2"

[cbob]

I've exhausted my search for the subject items. Are these no longer made? Tried Fasco, CC Fasts, Hamilton, Jamestown, Bowlin etc. I hate to use SS but might have to if I can't find these. I sure would appreciate any suggestions, I only need 6 and 3 each respectivly. Thanks in advance, cbob

[cbob]

I've exhausted my search for the subject items. Are these no longer made? Tried Fasco, CC Fasts, Hamilton, Jamestown, Bowlin etc. I hate to use SS but might have to if I can't find these. I sure would appreciate any suggestions, I only need 6 and 3 each respectivly. Thanks in advance, cbob

[cbob]

I've exhausted my search for the subject items. Are these no longer made? Tried Fasco, CC Fasts, Hamilton, Jamestown, Bowlin etc. I hate to use SS but might have to if I can't find these. I sure would appreciate any suggestions, I only need 6 and 3 each respectivly. Thanks in advance, cbob

[Carlsboats]

What diameter sil. bz mach. screws???

[Carlsboats]

What diameter sil. bz mach. screws???

[Carlsboats]

What diameter sil. bz mach. screws???

[Ken Hutchins]

I think I've got some in plain plain steel round head if that helps. I doubt if you will find any SB or Stainless.

[Ken Hutchins]

I think I've got some in plain plain steel round head if that helps. I doubt if you will find any SB or Stainless.

[Ken Hutchins]

I think I've got some in plain plain steel round head if that helps. I doubt if you will find any SB or Stainless.

[Ken Hutchins]

Mc Master Carr (http://www.mcmaster.com/) has them in brass and stainless.

[Ken Hutchins]

Mc Master Carr (http://www.mcmaster.com/) has them in brass and stainless.

[Ken Hutchins]

Mc Master Carr (http://www.mcmaster.com/) has them in brass and stainless.

[cbob]

Thanks all, Key word is Silbrz. 10 24 is just under 3/16", 12 24 just over 3/16", no micrometer but these are somewhat standard nomenclatures, never had to measure before, just match to the drill. Most of those mentioned have in ss and brass. R.J Layhey(sp?)may have will check on Monday,but may have a minimum order, $20 or like that. Thanks, cbob

[cbob]

Thanks all, Key word is Silbrz. 10 24 is just under 3/16", 12 24 just over 3/16", no micrometer but these are somewhat standard nomenclatures, never had to measure before, just match to the drill. Most of those mentioned have in ss and brass. R.J Layhey(sp?)may have will check on Monday,but may have a minimum order, $20 or like that. Thanks, cbob

[cbob]

Thanks all, Key word is Silbrz. 10 24 is just under 3/16", 12 24 just over 3/16", no micrometer but these are somewhat standard nomenclatures, never had to measure before, just match to the drill. Most of those mentioned have in ss and brass. R.J Layhey(sp?)may have will check on Monday,but may have a minimum order, $20 or like that. Thanks, cbob

[Dave Fleming]

That is not even a minimum order for most outfits.

But keep trying, perhaps someone will send you what you need as a "Sample" order.

Did you try these folks? I use them all the time for Silly Brnz.

Standard Fasteners/ STA FAST (http://www.babbittsteam.com/product.htm)

[Dave Fleming]

That is not even a minimum order for most outfits.

But keep trying, perhaps someone will send you what you need as a "Sample" order.

Did you try these folks? I use them all the time for Silly Brnz.

Standard Fasteners/ STA FAST (http://www.babbittsteam.com/product.htm)

[Dave Fleming]

That is not even a minimum order for most outfits.

But keep trying, perhaps someone will send you what you need as a "Sample" order.

Did you try these folks? I use them all the time for Silly Brnz.

Standard Fasteners/ STA FAST (http://www.babbittsteam.com/product.htm)

[JimConlin]

According to the current 2004 Sta-Fast catalog, they have SB FHMS in 6-32, 8-32, 10-24, 10-32, 1/4-20, 5/16-18, 3/18-16 and 1/2-13.

[WARNING: OFF-THE-WALL IDEA]
They do have #12 SB FHWS up to 4" .
If you've just gotta have those short #12 FHMS, this could be a start.
List prices for a box(100) of SB FHWS is
#12x2-1/2" $61.00
#12x3" $70.35.

Dunno what the less-than-box prices are or who gets what discount.

Drop a dime 800 678 8811

[JimConlin]

According to the current 2004 Sta-Fast catalog, they have SB FHMS in 6-32, 8-32, 10-24, 10-32, 1/4-20, 5/16-18, 3/18-16 and 1/2-13.

[WARNING: OFF-THE-WALL IDEA]
They do have #12 SB FHWS up to 4" .
If you've just gotta have those short #12 FHMS, this could be a start.
List prices for a box(100) of SB FHWS is
#12x2-1/2" $61.00
#12x3" $70.35.

Dunno what the less-than-box prices are or who gets what discount.

Drop a dime 800 678 8811

[JimConlin]

According to the current 2004 Sta-Fast catalog, they have SB FHMS in 6-32, 8-32, 10-24, 10-32, 1/4-20, 5/16-18, 3/18-16 and 1/2-13.

[WARNING: OFF-THE-WALL IDEA]
They do have #12 SB FHWS up to 4" .
If you've just gotta have those short #12 FHMS, this could be a start.
List prices for a box(100) of SB FHWS is
#12x2-1/2" $61.00
#12x3" $70.35.

Dunno what the less-than-box prices are or who gets what discount.

Drop a dime 800 678 8811

[cbob]

Thanks All. Gotem at Fsaco through Svendsens, with nuts and washers, about$4.50, in stainless, ugh. cbob

[cbob]

Thanks All. Gotem at Fsaco through Svendsens, with nuts and washers, about$4.50, in stainless, ugh. cbob

[cbob]

Thanks All. Gotem at Fsaco through Svendsens, with nuts and washers, about$4.50, in stainless, ugh. cbob

[JimConlin]

Did Stafast not have 'em?

[JimConlin]

Did Stafast not have 'em?

[JimConlin]

Did Stafast not have 'em?