PDA

View Full Version : WOODEN TACKLE BOX PLANS


Bob at Compass Boat
02-22-2006, 05:34 PM
Hi,
Like I need another project. Have been searching wood and wood sites on the web for plans for a classic wooden tackle box. With automatic lift trays etc. Believe they were of Mahogany. I would like to use Cherry. Thanks in advance for any clues on plan sources.

Bob V.

Bob at Compass Boat
02-22-2006, 05:34 PM
Hi,
Like I need another project. Have been searching wood and wood sites on the web for plans for a classic wooden tackle box. With automatic lift trays etc. Believe they were of Mahogany. I would like to use Cherry. Thanks in advance for any clues on plan sources.

Bob V.

Bob at Compass Boat
02-22-2006, 05:34 PM
Hi,
Like I need another project. Have been searching wood and wood sites on the web for plans for a classic wooden tackle box. With automatic lift trays etc. Believe they were of Mahogany. I would like to use Cherry. Thanks in advance for any clues on plan sources.

Bob V.

Donn
02-22-2006, 06:05 PM
How about this hobby box (http://www.woodworkersjournal.com/plans/index.cfm/plan_details/5/10/166)?

<img src= "http://www.woodworkersjournal.com/store/images/59048-1s.jpg">

Donn
02-22-2006, 06:05 PM
How about this hobby box (http://www.woodworkersjournal.com/plans/index.cfm/plan_details/5/10/166)?

<img src= "http://www.woodworkersjournal.com/store/images/59048-1s.jpg">

Donn
02-22-2006, 06:05 PM
How about this hobby box (http://www.woodworkersjournal.com/plans/index.cfm/plan_details/5/10/166)?

<img src= "http://www.woodworkersjournal.com/store/images/59048-1s.jpg">

Donn
02-22-2006, 06:19 PM
Here's (http://www.rockler.com/findit.cfm?page=590&cookietest=1) an automatic tray jewelry box, and a souce for the lifting hardware. With their hardware, you could design your own box.

<img src= "http://images.rockler.com/rockler/images/40436-lg.jpg">

Donn
02-22-2006, 06:19 PM
Here's (http://www.rockler.com/findit.cfm?page=590&cookietest=1) an automatic tray jewelry box, and a souce for the lifting hardware. With their hardware, you could design your own box.

<img src= "http://images.rockler.com/rockler/images/40436-lg.jpg">

Donn
02-22-2006, 06:19 PM
Here's (http://www.rockler.com/findit.cfm?page=590&cookietest=1) an automatic tray jewelry box, and a souce for the lifting hardware. With their hardware, you could design your own box.

<img src= "http://images.rockler.com/rockler/images/40436-lg.jpg">

Bob Smalser
02-22-2006, 07:21 PM
Take a tape to the sporting goods store and get the dimensions of one you like. Then it's just a matter of increasing the scantlings and overall dimensions accordingly to accommodate half-inch stock for the box and 1/4" minus stock for the trays.

http://pic3.picturetrail.com/VOL12/1104763/2594265/130418441.jpg

Had some WO left over from a boat and made the wife a copy of her favorite grooming tool box.

http://pic3.picturetrail.com/VOL12/1104763/2594265/130418445.jpg

One trick in dovetailing quarter-inch minus stock is to join 3/8" stock and plane it down after assembly on the jointer.

Bob Smalser
02-22-2006, 07:21 PM
Take a tape to the sporting goods store and get the dimensions of one you like. Then it's just a matter of increasing the scantlings and overall dimensions accordingly to accommodate half-inch stock for the box and 1/4" minus stock for the trays.

http://pic3.picturetrail.com/VOL12/1104763/2594265/130418441.jpg

Had some WO left over from a boat and made the wife a copy of her favorite grooming tool box.

http://pic3.picturetrail.com/VOL12/1104763/2594265/130418445.jpg

One trick in dovetailing quarter-inch minus stock is to join 3/8" stock and plane it down after assembly on the jointer.

Bob Smalser
02-22-2006, 07:21 PM
Take a tape to the sporting goods store and get the dimensions of one you like. Then it's just a matter of increasing the scantlings and overall dimensions accordingly to accommodate half-inch stock for the box and 1/4" minus stock for the trays.

http://pic3.picturetrail.com/VOL12/1104763/2594265/130418441.jpg

Had some WO left over from a boat and made the wife a copy of her favorite grooming tool box.

http://pic3.picturetrail.com/VOL12/1104763/2594265/130418445.jpg

One trick in dovetailing quarter-inch minus stock is to join 3/8" stock and plane it down after assembly on the jointer.

Hal Forsen
02-24-2006, 02:07 PM
Tackle Box
http://momentoffame.com/photopost/data/516/medium/Tackle_Box.JPG
HF

Hal Forsen
02-24-2006, 02:07 PM
Tackle Box
http://momentoffame.com/photopost/data/516/medium/Tackle_Box.JPG
HF

Hal Forsen
02-24-2006, 02:07 PM
Tackle Box
http://momentoffame.com/photopost/data/516/medium/Tackle_Box.JPG
HF