Galley Sink

[Terry Etapa]

OK, call me a cheap SOB, but I about gagged when I saw the price of a Scandvik 8 inch deep double stainless steel sink. Is there a good source for a more economical sink? I don't have the room for a full sized home kitchen model.

[ 11-01-2004, 08:34 PM: Message edited by: Terry Etapa ]

[Terry Etapa]

OK, call me a cheap SOB, but I about gagged when I saw the price of a Scandvik 8 inch deep double stainless steel sink. Is there a good source for a more economical sink? I don't have the room for a full sized home kitchen model.

[ 11-01-2004, 08:34 PM: Message edited by: Terry Etapa ]

[Terry Etapa]

OK, call me a cheap SOB, but I about gagged when I saw the price of a Scandvik 8 inch deep double stainless steel sink. Is there a good source for a more economical sink? I don't have the room for a full sized home kitchen model.

[ 11-01-2004, 08:34 PM: Message edited by: Terry Etapa ]

[capt jake]

Terry, there are a few RV salvage yards around the area. Maybe one of them will have something to fit the bill. There used to be one near Rochester and I believe Fitz in Woodenville still operates one as well.

[capt jake]

Terry, there are a few RV salvage yards around the area. Maybe one of them will have something to fit the bill. There used to be one near Rochester and I believe Fitz in Woodenville still operates one as well.

[capt jake]

Terry, there are a few RV salvage yards around the area. Maybe one of them will have something to fit the bill. There used to be one near Rochester and I believe Fitz in Woodenville still operates one as well.

[paladin]

make one...tain't hard.....when I built my trimaran a gazillion years ago they wuz cheeeep by todays standards but I couldn't afford one then...so I made one...looked nice...worked fine
...or ...buy one made fer a camper...

[paladin]

make one...tain't hard.....when I built my trimaran a gazillion years ago they wuz cheeeep by todays standards but I couldn't afford one then...so I made one...looked nice...worked fine
...or ...buy one made fer a camper...

[paladin]

make one...tain't hard.....when I built my trimaran a gazillion years ago they wuz cheeeep by todays standards but I couldn't afford one then...so I made one...looked nice...worked fine
...or ...buy one made fer a camper...

[seacoyote]

Terry - I do not know how much you want to spend, but there is a double stainless RV sink for sale at the site below for < $100

http://www.pplmotorhomes.com/parts/rv-pumps-water/rv-sinks-bath.htm

Good Luck,
C D Hunter

[seacoyote]

Terry - I do not know how much you want to spend, but there is a double stainless RV sink for sale at the site below for < $100

http://www.pplmotorhomes.com/parts/rv-pumps-water/rv-sinks-bath.htm

Good Luck,
C D Hunter

[seacoyote]

Terry - I do not know how much you want to spend, but there is a double stainless RV sink for sale at the site below for < $100

http://www.pplmotorhomes.com/parts/rv-pumps-water/rv-sinks-bath.htm

Good Luck,
C D Hunter

[Terry Etapa]

It looks like all the RV sinks are 5 inches deep. I'd prefer one of the 8 inch deep sinks.

Maybe an industrial/commercial sink of some type??

[Terry Etapa]

It looks like all the RV sinks are 5 inches deep. I'd prefer one of the 8 inch deep sinks.

Maybe an industrial/commercial sink of some type??

[Terry Etapa]

It looks like all the RV sinks are 5 inches deep. I'd prefer one of the 8 inch deep sinks.

Maybe an industrial/commercial sink of some type??

[Ron Williamson]

Can it be round?You could make one out of a stainless salad bowl.
R

[Ron Williamson]

Can it be round?You could make one out of a stainless salad bowl.
R

[Ron Williamson]

Can it be round?You could make one out of a stainless salad bowl.
R

[Dan McCosh]

Ours was called a "bar sink". Don't remember now what it cost, but I don't think it was much. Home Depot lists an 8" deep model for $69. I think they are around for even less.

[ 11-01-2004, 09:02 PM: Message edited by: Dan McCosh ]

[Dan McCosh]

Ours was called a "bar sink". Don't remember now what it cost, but I don't think it was much. Home Depot lists an 8" deep model for $69. I think they are around for even less.

[ 11-01-2004, 09:02 PM: Message edited by: Dan McCosh ]

[Dan McCosh]

Ours was called a "bar sink". Don't remember now what it cost, but I don't think it was much. Home Depot lists an 8" deep model for $69. I think they are around for even less.

[ 11-01-2004, 09:02 PM: Message edited by: Dan McCosh ]

[kc8pql]

Mine is 9" deep. It's made by Sterling. I got it from Defender for about $125. I think. It's been a while.

http://tinypic.com/fnqsz

Looks like Defender doesn't have them any more. I found this one at Hamilton that looks the same. Price is up a bit in the last 6 years though.

Hamilton (http://store.hamiltonmarine.com/browse.cfm/4,7708.html)

[ 11-01-2004, 11:14 PM: Message edited by: kc8pql ]

[kc8pql]

Mine is 9" deep. It's made by Sterling. I got it from Defender for about $125. I think. It's been a while.

http://tinypic.com/fnqsz

Looks like Defender doesn't have them any more. I found this one at Hamilton that looks the same. Price is up a bit in the last 6 years though.

Hamilton (http://store.hamiltonmarine.com/browse.cfm/4,7708.html)

[ 11-01-2004, 11:14 PM: Message edited by: kc8pql ]

[kc8pql]

Mine is 9" deep. It's made by Sterling. I got it from Defender for about $125. I think. It's been a while.

http://tinypic.com/fnqsz

Looks like Defender doesn't have them any more. I found this one at Hamilton that looks the same. Price is up a bit in the last 6 years though.

Hamilton (http://store.hamiltonmarine.com/browse.cfm/4,7708.html)

[ 11-01-2004, 11:14 PM: Message edited by: kc8pql ]

[Terry Etapa]

Thanks for the help. It looks like I'm going to go with the Sterling from Hamilton.

[Terry Etapa]

Thanks for the help. It looks like I'm going to go with the Sterling from Hamilton.

[Terry Etapa]

Thanks for the help. It looks like I'm going to go with the Sterling from Hamilton.