Skil 100 manual

[Ed Harrow]

Any chance someone might have a manual that they could copy for me, or know of a location from where one could be down-loaded? Thanks, Ed

[Ed Harrow]

Any chance someone might have a manual that they could copy for me, or know of a location from where one could be down-loaded? Thanks, Ed

[Ed Harrow]

Any chance someone might have a manual that they could copy for me, or know of a location from where one could be down-loaded? Thanks, Ed

[RGM]

I'll look around here for a manual. In the meantime check out Yahoo! Groups oldwwmachines. I'm not sure of their actual web address, but that info might get you there. Good luck.

[RGM]

I'll look around here for a manual. In the meantime check out Yahoo! Groups oldwwmachines. I'm not sure of their actual web address, but that info might get you there. Good luck.

[RGM]

I'll look around here for a manual. In the meantime check out Yahoo! Groups oldwwmachines. I'm not sure of their actual web address, but that info might get you there. Good luck.

[imported_Ola Sylwan]

Hi Ed,

Try this link:
http://www.skil.com/Help+With+Tools/Help+With+Tools+Sub+Pages/Instruction+Manuals.htm

Ola

[imported_Ola Sylwan]

Hi Ed,

Try this link:
http://www.skil.com/Help+With+Tools/Help+With+Tools+Sub+Pages/Instruction+Manuals.htm

Ola

[imported_Ola Sylwan]

Hi Ed,

Try this link:
http://www.skil.com/Help+With+Tools/Help+With+Tools+Sub+Pages/Instruction+Manuals.htm

Ola

[Ed Harrow]

LOL, I learned that the manual for the 100 is not listed... :)

[Ed Harrow]

LOL, I learned that the manual for the 100 is not listed... :)

[Ed Harrow]

LOL, I learned that the manual for the 100 is not listed... :)

[Wayne Jeffers]

If you're looking for an older model that isn't on this page, please visit our Customer Service area, then e-mail us or call the Customer Service center nearest you. Could be worth a shot?

Wayne

[Wayne Jeffers]

If you're looking for an older model that isn't on this page, please visit our Customer Service area, then e-mail us or call the Customer Service center nearest you. Could be worth a shot?

Wayne

[Wayne Jeffers]

If you're looking for an older model that isn't on this page, please visit our Customer Service area, then e-mail us or call the Customer Service center nearest you. Could be worth a shot?

Wayne

[flyon]

I should have he manual at home, e-mail your fax number and I will send it to you.

fredlyon@mindspring.com

[flyon]

I should have he manual at home, e-mail your fax number and I will send it to you.

fredlyon@mindspring.com

[flyon]

I should have he manual at home, e-mail your fax number and I will send it to you.

fredlyon@mindspring.com

[RGM]

Bingo! Found the manual and exploded view with parts list. Can you give me a fax number? you've got my e-mail(s), I'm here at work for 2 more hours.

[ 05-29-2002, 04:21 PM: Message edited by: RGM ]

[RGM]

Bingo! Found the manual and exploded view with parts list. Can you give me a fax number? you've got my e-mail(s), I'm here at work for 2 more hours.

[ 05-29-2002, 04:21 PM: Message edited by: RGM ]

[RGM]

Bingo! Found the manual and exploded view with parts list. Can you give me a fax number? you've got my e-mail(s), I'm here at work for 2 more hours.

[ 05-29-2002, 04:21 PM: Message edited by: RGM ]

[Ed Harrow]

Fred, thank you, in hand!

Rodger, the parts list would certainly be nice and, who knows, your manual might have stuff that Fred's didn't so, being the greedy sob that I am, I'll take your's, too. FAX = 508 337 5169. Thank you.

[Ed Harrow]

Fred, thank you, in hand!

Rodger, the parts list would certainly be nice and, who knows, your manual might have stuff that Fred's didn't so, being the greedy sob that I am, I'll take your's, too. FAX = 508 337 5169. Thank you.

[Ed Harrow]

Fred, thank you, in hand!

Rodger, the parts list would certainly be nice and, who knows, your manual might have stuff that Fred's didn't so, being the greedy sob that I am, I'll take your's, too. FAX = 508 337 5169. Thank you.

[Ed Harrow]

Well I'll be jiggered if Skil didn't come thru with a .pdf copy of their 82 manual. No parts list, tho. I'm still a greedy sob, so if one of you nice folk's manual is other than 1982 I'd still like to have it, along with the parts list, of course.

Thanks all!

[Ed Harrow]

Well I'll be jiggered if Skil didn't come thru with a .pdf copy of their 82 manual. No parts list, tho. I'm still a greedy sob, so if one of you nice folk's manual is other than 1982 I'd still like to have it, along with the parts list, of course.

Thanks all!

[Ed Harrow]

Well I'll be jiggered if Skil didn't come thru with a .pdf copy of their 82 manual. No parts list, tho. I'm still a greedy sob, so if one of you nice folk's manual is other than 1982 I'd still like to have it, along with the parts list, of course.

Thanks all!

[Dave Fleming]

So the 'debil' got to ya eh? Heh Heh Heh.
As I said before the big thing for the 100 is the damn belts!
Rest is just easy stuff, or so says I.

[Dave Fleming]

So the 'debil' got to ya eh? Heh Heh Heh.
As I said before the big thing for the 100 is the damn belts!
Rest is just easy stuff, or so says I.

[Dave Fleming]

So the 'debil' got to ya eh? Heh Heh Heh.
As I said before the big thing for the 100 is the damn belts!
Rest is just easy stuff, or so says I.

[RGM]

Ed, did you get the info that I faxed to you this morning? Maybe yes, maybe no? I'm pretty sure that I used the right number.

[RGM]

Ed, did you get the info that I faxed to you this morning? Maybe yes, maybe no? I'm pretty sure that I used the right number.

[RGM]

Ed, did you get the info that I faxed to you this morning? Maybe yes, maybe no? I'm pretty sure that I used the right number.

[Dave Fleming]

Roger, LUDD still got working 100's?
If so that is good news. Down here in 'insane Diego' they are gobbled up bye the surfboard makers.
Ed got his from such, seemed in fairly good shape to me.
Damn Campbell Shipyard had about 1/2 dozen of them but they auctioned everything off including the big 36 inch shipsaw. I didn't even go down for the auction.

[Dave Fleming]

Roger, LUDD still got working 100's?
If so that is good news. Down here in 'insane Diego' they are gobbled up bye the surfboard makers.
Ed got his from such, seemed in fairly good shape to me.
Damn Campbell Shipyard had about 1/2 dozen of them but they auctioned everything off including the big 36 inch shipsaw. I didn't even go down for the auction.

[Dave Fleming]

Roger, LUDD still got working 100's?
If so that is good news. Down here in 'insane Diego' they are gobbled up bye the surfboard makers.
Ed got his from such, seemed in fairly good shape to me.
Damn Campbell Shipyard had about 1/2 dozen of them but they auctioned everything off including the big 36 inch shipsaw. I didn't even go down for the auction.

[Ed Harrow]

Thank you Roger! It was dropped onto my desk just a wee few minutes ago.

I think I'm well fixed now, at least as well fixed with information as I can be. Case closed.

[Ed Harrow]

Thank you Roger! It was dropped onto my desk just a wee few minutes ago.

I think I'm well fixed now, at least as well fixed with information as I can be. Case closed.

[Ed Harrow]

Thank you Roger! It was dropped onto my desk just a wee few minutes ago.

I think I'm well fixed now, at least as well fixed with information as I can be. Case closed.

[RGM]

You're welcome Ed. Hi Dave, yes LUDD has a handful of Skil 100's. We've gotten alot of good mileage out of them over the years. What helped with that was the fact that we have a dedicated millwright/tool room guy and stock of spare parts (usually). Additionally, they were used by the same sets of hands in the crew over the years. Needless to say these guys appreciated the value of good tools. We've always believed "You take care of your tools and they'll take care of you". We even have extra sets of blades that are ground for back-out work.

[ 05-31-2002, 10:40 AM: Message edited by: RGM ]

[RGM]

You're welcome Ed. Hi Dave, yes LUDD has a handful of Skil 100's. We've gotten alot of good mileage out of them over the years. What helped with that was the fact that we have a dedicated millwright/tool room guy and stock of spare parts (usually). Additionally, they were used by the same sets of hands in the crew over the years. Needless to say these guys appreciated the value of good tools. We've always believed "You take care of your tools and they'll take care of you". We even have extra sets of blades that are ground for back-out work.

[ 05-31-2002, 10:40 AM: Message edited by: RGM ]

[RGM]

You're welcome Ed. Hi Dave, yes LUDD has a handful of Skil 100's. We've gotten alot of good mileage out of them over the years. What helped with that was the fact that we have a dedicated millwright/tool room guy and stock of spare parts (usually). Additionally, they were used by the same sets of hands in the crew over the years. Needless to say these guys appreciated the value of good tools. We've always believed "You take care of your tools and they'll take care of you". We even have extra sets of blades that are ground for back-out work.

[ 05-31-2002, 10:40 AM: Message edited by: RGM ]

[Dave Fleming]

Roger
Ah to be back in Shipwrights Heaven.......

[Dave Fleming]

Roger
Ah to be back in Shipwrights Heaven.......

[Dave Fleming]

Roger
Ah to be back in Shipwrights Heaven.......

[Ed Harrow]

We got a spare room Dave. ;)

[Ed Harrow]

We got a spare room Dave. ;)

[Ed Harrow]

We got a spare room Dave. ;)

[Dave Fleming]

Ed, hell I can sleep any where,as long as it has room for my special chair. :(
Haven't slept in a bed since 9-9-89, little thingy in the left ear doncha know.
But if ya have an extra bottle or two of Myers let me know. smile.gif

[ 05-31-2002, 01:56 PM: Message edited by: Dave Fleming ]

[Dave Fleming]

Ed, hell I can sleep any where,as long as it has room for my special chair. :(
Haven't slept in a bed since 9-9-89, little thingy in the left ear doncha know.
But if ya have an extra bottle or two of Myers let me know. smile.gif

[ 05-31-2002, 01:56 PM: Message edited by: Dave Fleming ]

[Dave Fleming]

Ed, hell I can sleep any where,as long as it has room for my special chair. :(
Haven't slept in a bed since 9-9-89, little thingy in the left ear doncha know.
But if ya have an extra bottle or two of Myers let me know. smile.gif

[ 05-31-2002, 01:56 PM: Message edited by: Dave Fleming ]

[Ed Harrow]

Going to stop on the way home for the Myers ;)

[Ed Harrow]

Going to stop on the way home for the Myers ;)

[Ed Harrow]

Going to stop on the way home for the Myers ;)

[Dave Fleming]

I'm leavin' on a jet plane with my chair upon my back....... :D

[ 05-31-2002, 03:08 PM: Message edited by: Dave Fleming ]

[Dave Fleming]

I'm leavin' on a jet plane with my chair upon my back....... :D

[ 05-31-2002, 03:08 PM: Message edited by: Dave Fleming ]

[Dave Fleming]

I'm leavin' on a jet plane with my chair upon my back....... :D

[ 05-31-2002, 03:08 PM: Message edited by: Dave Fleming ]

[Ed Harrow]

Providence, Boston, or Worcester? Let me know, I'll be there to pick you up...

[Ed Harrow]

Providence, Boston, or Worcester? Let me know, I'll be there to pick you up...

[Ed Harrow]

Providence, Boston, or Worcester? Let me know, I'll be there to pick you up...

[toolman]

Anyone want to sell a skil 100?

[toolman]

Anyone want to sell a skil 100?

[toolman]

Anyone want to sell a skil 100?