Seattle CL Lots of Teak

[goodbasil]

http://seattle.craigslist.org/see/boa/1594582830.html

[TimH]

Another boat builder bites the dust.

Most at about 1/2 price.

U-line Ice maker. model SS-98 Microtherm cost $1,041 and sell for $800
br> Norcold ibox converter sell for $500, new in the box.
KitchenAid Propane range with convection oven Black and Stainless steel. model # KGST307H slide in full size. Cost $2,100 and sell for $1,400

DB 170 rolls of split fiberglass fabric. 4", 6",8", etc. 1/2 price sold by pound

Walnut veneers, remnant sizes

Exhaust hoses different sizes and lengths. 1/2 price
Bermese Teak, all at $15 bdft.

13'2" X 7" X 1 1/2" (or thicker) = 11.52 bdft = $172.81
12'1" X 6" X " = 9.06 bdft = $135.94
13'1" X 6" X " = 9.81 bdft = $147.19
12'8" X 6" X " = 9.5 bdft = $142.50
13'8" X 6" X " = 10.25 bdft = $153.75 There are shorter lengths
13'2" X 7" X " = 11.52 bdft = $172.81
12'1" X 8" X " = 12.08 bdft = $181.25
12'4" X 11" X " = 16.96 bdft = $254.38
12'4" X 11" X " = 16.96 bdft = $254.38

Also have 4/4 this is 6" and wider and 6' and longer
10' X 11" = 9.78 bdft = $146.67
11'3" X 9" = 8.44 $126.56
12'3" X 11" = 11.23 = $168.44
12'2" X 10" = 10.14 = $152.08
9'9" X 7" = 5.69 = $85.31
10' X 8" = 6.67 = $100.00
7' X 9" = 5.25 = $78.25
11'2" X 12" = 11.17 $167.50
6'8" X 8" = 4.44 = $66.67
7'8" X 8" 5.11 = $76.67
11'8" X 6" 5.83 = $87.50


Also have 1/8" X 3 1/2" 14'-15' $2.50 lnft 156' = $390
2 1/2" $2.05 145 = $297.25
8 3/4" $5.00 294 = $1,470 Pretty sure this is all here.
3" $2.35 294 = $690.90
5 3/4" $3.60 878 = $3,160.80
4 1/2" $2.65 876 = $2,321.40

There is also holly board 7/8" X 3-6" wide and 3' -4' long 10 bdft $200.

Packages of veneer pieces, all from the same tree.
Harken Big Bullet Block 1-1/2" in-line exit $10.
!/2" and larger clear with tracer water hose. 1/2 price

Blue rib fenders about 20" long. ($74 ea value, $300) Sell all 4 of them with lines $150
Epoxy mixing machine, used, cost $770 and sell for $250

Fuel tank straps (make an offer)
Whale plumbing fittings. Assortment of 13mm less than 1/2 price.
Hand held portable 1 million candle lights. ($28.59 value) $15
Morse dual control lever system, $300
Rolls of split wire loom in different sizes, average $.50 ft.
New 9" Paint roller handles, ($4.86 value) $2.00
"Tank Tender" tank level monitor system, 10/30" and have 6 tank senders with this. List for $900 and sell for $500
Rudder angle indicators Jastram Master Meter. ABOUT $1,700 COST FOR 2 SYSTEMS AND I'LL SELL THEM BOTH FOR $850, NEW IN THEIR BOX.

[Trawlercap]

http://seattle.craigslist.org/see/boa/1594582830.html


Have you ever tried this: http://www.craiglook.com/

Just enter what you are looking for, and do not put in a location, it will search Craigslist throughout the country. Nothing to download, is a webpage.
You can put in a zip code and expand it out to 250 miles also.

[JPhoenix]

[QUOTE=TimH;2486735]Another boat builder bites the dust."

Not really, he said business is still very good - he just wants to get rid of some teak he has lying around and is not going to use. So I obliged for about 30 bf of it.

Nice guy, plenty of teak left - which is good since Edensaw moved out of Kent and only sells veneer in the Tacoma warehouse. Now I have enough to finish off the old Monk - I hope.

Jim

[Trawlercap]

1969 32' Kingcraft cabin cruiser with solid teak hull. Deck and house toast.

Would this be something to pursue? Dismantling for the teak I mean.